СИНОПСИС
stepconf
ОПИСАНИЕ
stepconf aids in the configuration of machines using the parallel port interface.
СМОТРИТЕ ТАКЖЕ
linuxcnc(1)
Much more information about LinuxCNC and HAL is available in the LinuxCNC and HAL User Manuals, found at /usr/share/doc/LinuxCNC/.
BUGS
None known at this time.
АВТОР
This man page written by Andy Pugh, as part of the LinuxCNC project.
СООБЩЕНИЕ ОБ ОШИБКАХ
Сообщайте об ошибках по адресу https://github.com/LinuxCNC/linuxcnc/issues.
АВТОРСКОЕ ПРАВО
Copyright © 2020 Andy Pugh.
This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.