linuxcnctop(1) Manual Page

linuxcnctop -ini INIFILE

linuxcnctop displays much of the LinuxCNC state in a live format similar to the Linux "top" command.

It is more fully documented in the AXIS GUI documentation but can be run standalone or with other GUIs.

linuxcnc(1)

https://linuxcnc.org/docs/html/gui/axis.html

Much more information about LinuxCNC and HAL is available in the LinuxCNC and HAL User Manuals, found at /usr/share/doc/LinuxCNC/.

None known at this time.

This man page written by Andy Pugh, as part of the LinuxCNC project.

Сообщайте об ошибках по адресу https://github.com/LinuxCNC/linuxcnc/issues.

Copyright © 2020 Andy Pugh.

This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.