СИНОПСИС
linuxcnclcd -ini <INI file>
ОПИСАНИЕ
linuxcnclcd is one of the Graphical User Interfaces (GUI) for LinuxCNC. It gets typically run by the runscript. Linuxcnclcd is designed to run on a 4 x 20 LCD character display. It is not clear if it has ever worked.
ОПЦИИ
- INI file
-
The INI file is the main piece of an LinuxCNC configuration. It is not the entire configuration; there are various other files that go with it (NML files, HAL files, TBL files, VAR files). It is, however, the most important one, because it is the file that holds the configuration together. It can adjust a lot of parameters itself, but it also tells LinuxCNC which other files to load and use.
СМОТРИТЕ ТАКЖЕ
linuxcnc(1)
Much more information about LinuxCNC and HAL is available in the LinuxCNC and HAL User Manuals, found at /usr/share/doc/LinuxCNC/.
BUGS
None known at this time.
АВТОР
This man page written by Andy Pugh, as part of the LinuxCNC project.
СООБЩЕНИЕ ОБ ОШИБКАХ
Сообщайте об ошибках по адресу https://github.com/LinuxCNC/linuxcnc/issues.
АВТОРСКОЕ ПРАВО
Copyright © 2020 Andy Pugh.
This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.