ОПИСАНИЕ
lineardelta is one of the sample Vismach GUIs for LinuxCNC, simulating a delta robot with linear actuators.
СМОТРИТЕ ТАКЖЕ
linuxcnc(1)
Более подробную информацию см. в основной документации LinuxCNC. https://linuxcnc.org/docs/html/gui/vismach.html
BUGS
None known at this time.
АВТОР
This man page written by Andy Pugh, as part of the LinuxCNC project.
СООБЩЕНИЕ ОБ ОШИБКАХ
Сообщайте об ошибках по адресу https://github.com/LinuxCNC/linuxcnc/issues.
АВТОРСКОЕ ПРАВО
Copyright © 2020 Andy Pugh.
This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.