OPPSUMMERING
panelui
BESKRIVELSE
The non-realtime component panelui interfaces buttons to LinuxCNC or HAL. It decodes MESA 7I73 style key-scan codes and calls the appropriate routine. It gets input from a realtime component - sampler. Sampler gets it’s input from either the MESA 7i73 or sim_matrix_kb component. Panelui is configurable using an INI style text file to define button types, HAL pin types, and/or commands.
Full documentation can be found in the HTML or PDF docs: https://linuxcnc.org/docs/html/gui/panelui.html
SE OGSÅ
linuxcnc(1)
Mye mer informasjon om LinuxCNC og HAL er tilgjengelig i brukerhåndbøkene for LinuxCNC og HAL, tilgjengelig i /usr/share/doc/LinuxCNC/.
FEIL
Ingen kjent for øyeblikket.
FORFATTER
This man page written by Andy Pugh, as part of the LinuxCNC project.
FEILRAPPORTERING
Report bugs at https://github.com/LinuxCNC/linuxcnc/issues.
ÅNDSVERKSRETTIGHETER
Copyright © 2020 Andy Pugh.
This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.