OPPSUMMERING
halshow [options] [watchfile]
VALGMULIGHETER
- --help
-
Displays the help
- --fformat format_string_for_float
-
Float format string
- --iformat format_string_for_int
-
Integer format string
For format see https://www.tcl.tk/man/tcl8.6.11/TclCmd/format.html
Example: "%.5f" displays a float with 5 digits right of the decimal point.
- --noprefs
-
Don’t use preference file to save settings.
BESKRIVELSE
The program halshow creates a GUI interface to view and interact with a running HAL session.
SE OGSÅ
linuxcnc(1)
Halshow is documented in the PDF and HTML documentation much more completely than is possible in a manpage: https://linuxcnc.org/docs/html/hal/halshow.html
HISTORIE
- LinuxCNC 2.9
-
-
Added buttons for pin/parameter/signal manipulation.
-
Added menu entries for setting update interval, adding manually.
-
Added right-click menu for copy, set, unlink pin and remove from view.
-
Added button to expand/collapse the tree view.
-
Added search entry.
-
FEIL
Ingen kjent for øyeblikket.
FORFATTER
Raymond E. Henry
FEILRAPPORTERING
Report bugs at https://github.com/LinuxCNC/linuxcnc/issues.
ÅNDSVERKSRETTIGHETER
Copyright © 2020 Andy Pugh.
This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.