OPPSUMMERING
axis-remote OPTIONS|FILENAME
BESKRIVELSE
axis-remote is a small script that triggers commands in a running AXIS GUI.
Use axis-remote --help for further information.
VALGMULIGHETER
- --ping, -p
-
Check whether AXIS is running.
- --reload, -r
-
Make AXIS reload the currently loaded file.
- --clear, -c
-
Make AXIS clear the backplot.
- --quit, -q
-
Make AXIS quit.
- --help, -h, -?
-
Display a list of valid parameters for axis-remote.
- --mdi COMMAND, -m COMMAND
-
Run the MDI command COMMAND.
- FILNAVN
-
Load the G-code file FILENAME.
SE OGSÅ
axis(1)
Much more information about LinuxCNC and HAL is available in the LinuxCNC and HAL User Manuals, found at /usr/share/doc/linuxcnc/.
FEIL
Ingen kjent for øyeblikket.
FORFATTER
This man page written by Alex Joni, as part of the LinuxCNC project.
FEILRAPPORTERING
Report bugs at https://github.com/LinuxCNC/linuxcnc/issues.
ÅNDSVERKSRETTIGHETER
Copyright © 2007 Alex Joni.
This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.