NEWS
LinuxCNC 2.5.2 Release
There are no translations available.

LinuxCNC 2.5.2 Update Released (changelog).
 
LinuxCNC 2.5.1 Release
There are no translations available.

LinuxCNC 2.5.1 Update Released (changelog). If the Package Manager does not prompt you to upgrade see this page.
 
LinuxCNC 2.5.0 Release
There are no translations available.

New major release (changelog). See the instructions to update your system from EMC 2.4 to LinuxCNC 2.5.
 
Home Forum Configuring LinuxCNC GladeVCP hal_spinbutton

Welcome, Guest
Username: Password: Remember me
Forgot your password? Forgot your username?

TOPIC: hal_spinbutton

Re:hal_spinbutton 11 Янв 2012 05:09 #16591

  • piasdom
  • piasdom's Avatar
  • OFFLINE
  • Platinum Boarder
  • Posts: 537
  • Karma: 2
COOL. yeap, that fix it. THANKS dab77

with a little testing i found it doesn't stay when i restart emc2.5 after
changing the value in glade.
if i go back to the ui and change one of properties' position, it
works again.
Last Edit: 11 Янв 2012 05:16 by piasdom.
The administrator has disabled public write access.

Re:hal_spinbutton 11 Янв 2012 06:40 #16599

  • dab77
  • dab77's Avatar
  • OFFLINE
  • Gold Boarder
  • Posts: 199
  • Karma: 6
Yes, unfortunately it's like that.
The administrator has disabled public write access.

Re:hal_spinbutton 11 Янв 2012 08:00 #16602

  • piasdom
  • piasdom's Avatar
  • OFFLINE
  • Platinum Boarder
  • Posts: 537
  • Karma: 2
also, i have one MDI button. if i click it (works) then try another button, they
don't work til i home and axis or run the program
so i added another button and the same results. after clicking on
the mdi buttons, i can't move any axis til i run or home an axis

reset is MDI command m123(reset script)
Rapid X0 Y0 Z.2 = g0 x0 y0 z.2



just to let ya'll know

Thanks
kenneth
The administrator has disabled public write access.
Moderators: mhaberler
Time to create page: 1.790 seconds
Powered by Kunena Forum
© 2013 LinuxCNC.org
Joomla! is Free Software released under the GNU General Public License.