NEWS
LinuxCNC 2.5.2 Release
There are no translations available.

LinuxCNC 2.5.2 Update Released (changelog).
 
LinuxCNC 2.5.1 Release
There are no translations available.

LinuxCNC 2.5.1 Update Released (changelog). If the Package Manager does not prompt you to upgrade see this page.
 
LinuxCNC 2.5.0 Release
There are no translations available.

New major release (changelog). See the instructions to update your system from EMC 2.4 to LinuxCNC 2.5.
 
Home Forum General International LinuxCNC Users Español busco manual emc2 y informacion en español

Welcome, Guest
Username: Password: Remember me
Forgot your password? Forgot your username?
  • Page:
  • 1
  • 2

TOPIC: busco manual emc2 y informacion en español

Re:busco manual emc2 y informacion en español 23 Июн 2012 03:42 #21218

  • BigJohnT
  • BigJohnT's Avatar
  • OFFLINE
  • Administrator
  • Posts: 4955
  • Thank you received: 87
  • Karma: 134
The Getting Started manual was mostly translated but the translator must have got tired as I've not seen any more in a while... if you go to the html docs and start at the top the first 5 have been translated.

John
The administrator has disabled public write access.

Re:busco manual emc2 y informacion en español 23 Июн 2012 09:35 #21229

El compañero charro del foro fresadoras cnc a iniciado la traduccion del manual frs-cnc.com/foro1/viewtopic.php?f=17&t=2878 y desde el foro metal aficion hay una persona dispuesta a colavorar en la traduccion foro.metalaficion.com/index.php/topic,8635.0.html
The administrator has disabled public write access.

Re:busco manual emc2 y informacion en español 24 Июн 2012 03:24 #21245

  • ArcEye
  • ArcEye's Avatar
  • OFFLINE
  • Moderator
  • Posts: 1335
  • Thank you received: 102
  • Karma: 129
The Getting Started manual was mostly translated but the translator must have got tired as I've not seen any more in a while... if you go to the html docs and start at the top the first 5 have been translated.

Looks like the User Manual is translated as far as the start of page 114 on this link
www.helmantikos.com/cnc/texto/emc2usman/emc2usermanual.html

Just another 60 pages to go!
The administrator has disabled public write access.

Re:busco manual emc2 y informacion en español 17 Дек 2012 18:21 #27811

  • xolotl4
  • xolotl4's Avatar
  • OFFLINE
  • Fresh Boarder
  • Posts: 3
  • Karma: 0
Saludos, yo soy de Mexico ya tengo varios años trabajando con LinuxCNC, lo he implementado en maquinas educativas e industriales y parte de mi trabajo de tesis de doctorado esta basado en el, les dejo un par de artículos en español con mis experiencias en la implementación de LinuxCNC en varias maquinas (Tornos, Fresas, etc), son ligas a PDF's de dos artículos que escribí.

somim.org.mx/articulos2010/memorias/memo...os/pdfs/A2/A2_70.pdf

dialnet.unirioja.es/descarga/articulo/3832369.pdf
The administrator has disabled public write access.
  • Page:
  • 1
  • 2
Moderators: dangercraft
Time to create page: 1.459 seconds
Powered by Kunena Forum
© 2013 LinuxCNC.org
Joomla! is Free Software released under the GNU General Public License.