Welcome to LinuxCNC.org

gscreen - large dro showing, gcode program showing ready to run, with modified blue-joy theme

gscreen with large dro hidden , offsets showing, blue emerald theme:

gscreen patch to go against current as of now master.

adds fullscreen (not maximize - all of it!) capability
adds an embedded terminal for call debugging programs.
adds an option to use aux coolant instead of mist or flood
this was requested by my only tester cncbasher, it requires one to connect HAL to gscreens coolant pins instead of linxcnc's
fixed save and save-as for gcode edits.
probably some other stuff This attachment is hidden for guests. Please log in or register to see it.

Cncbasher had a problem when first opening gscreen because of the preference file.
so here is a copy of a preference file if that happes.
name it '.gscreen_prefences' (without quotes, note the period) and put it in your home file. This attachment is hidden for guests. Please log in or register to see it.

here is the patch as a compressed file - alot easier This attachment is hidden for guests. Please log in or register to see it.

just about to take the step now of configuring without axis , for the first time , so jumping without a safety net ! ( only figuratively thank god )
but all seems to fit in well , touch screen is working fine , no difficultys selecting etc .

now a machine on togglebutton , with colour change red / green so you can see status perhaps
needs to be i think on the right side under the estop , or perhaps top left next to status .
in a similar style to the estop and led i think would suit better