NEWS
LinuxCNC 2.5.2 Release
There are no translations available.

LinuxCNC 2.5.2 Update Released (changelog).
 
LinuxCNC 2.5.1 Release
There are no translations available.

LinuxCNC 2.5.1 Update Released (changelog). If the Package Manager does not prompt you to upgrade see this page.
 
LinuxCNC 2.5.0 Release
There are no translations available.

New major release (changelog). See the instructions to update your system from EMC 2.4 to LinuxCNC 2.5.
 
Home Forum Configuring LinuxCNC PnCConf Wizard Mesa 5i25+7i77 plug-n-go configuration

Welcome, Guest
Username: Password: Remember me
Forgot your password? Forgot your username?

TOPIC: Mesa 5i25+7i77 plug-n-go configuration

Re:Mesa 5i25+7i77 plug-n-go configuration 10 Май 2012 08:04 #19976

  • PCW
  • PCW's Avatar
  • OFFLINE
  • Moderator
  • Posts: 1650
  • Thank you received: 87
  • Karma: 116
Thats correct, there is no firmware directory for the 5I25
(the 5I25 stores its firmware on the card)

I was just thinking that perhaps the hostmot2-firmware package installs the hostmot2 configs but
the configs are in the normal 2.5 release tree so I dont know why you dont have them by default

what directories do you have in ~/linuxcnc/configs/ ?
.
Last Edit: 10 Май 2012 08:07 by PCW. Reason: aspergers
The administrator has disabled public write access.

Re:Mesa 5i25+7i77 plug-n-go configuration 10 Май 2012 08:11 #19977

  • ishman
  • ishman's Avatar
  • OFFLINE
  • Expert Boarder
  • Posts: 82
  • Karma: 0
I have the following directories in ~/linuxcnc/configs/

5axis
my_LinuxCNC_machine
my-mill
sim

two of them started with my are created by me. One with stepconf and one with pncconf. Both have their xml files as well in the same directory.
The administrator has disabled public write access.

Re:Mesa 5i25+7i77 plug-n-go configuration 10 Май 2012 08:27 #19978

  • PCW
  • PCW's Avatar
  • OFFLINE
  • Moderator
  • Posts: 1650
  • Thank you received: 87
  • Karma: 116
OK you would probably have to start Linuxcnc and select an existing hm2-servo config
(doesnt matter which one) to create the directory
The administrator has disabled public write access.

Re:Mesa 5i25+7i77 plug-n-go configuration 10 Май 2012 08:35 #19979

  • ishman
  • ishman's Avatar
  • OFFLINE
  • Expert Boarder
  • Posts: 82
  • Karma: 0
Thanks for your effort ! but I am unable to figure out where to get existing hm2-servo config ? Do you mean my own created one ?

I have created "my_LinuxCNC_machine" with pncconf and it configures both 5i25 and 7i77. atleast not giving any error till loading the linuxcnc. I will try to hook this configuration with my machine on Saturday.
The administrator has disabled public write access.

Re:Mesa 5i25+7i77 plug-n-go configuration 10 Май 2012 08:56 #19980

  • PCW
  • PCW's Avatar
  • OFFLINE
  • Moderator
  • Posts: 1650
  • Thank you received: 87
  • Karma: 116
No, start linuxcnc and select a hm2-servo config from the sample configs.
The administrator has disabled public write access.

Re:Mesa 5i25+7i77 plug-n-go configuration 10 Май 2012 09:05 #19981

  • ishman
  • ishman's Avatar
  • OFFLINE
  • Expert Boarder
  • Posts: 82
  • Karma: 0
I got it ! It created a directory hm2-servo. There is some <board>.ini files with hm2-servo.hal and readme.txt and tool.tbl.
Last Edit: 10 Май 2012 09:06 by ishman.
The administrator has disabled public write access.
Moderators: cmorley
Time to create page: 1.392 seconds
Powered by Kunena Forum
© 2013 LinuxCNC.org
Joomla! is Free Software released under the GNU General Public License.