LinuxCNC Support Forum :: Topic: Help needed! SEI DT router 650. (2/5)

NEWS

LinuxCNC 2.5.2 Release

There are no translations available.

LinuxCNC 2.5.2 Update Released (changelog).

LinuxCNC 2.5.1 Release

There are no translations available.

LinuxCNC 2.5.1 Update Released (changelog). If the Package Manager does not prompt you to upgrade see this page.

LinuxCNC 2.5.0 Release

There are no translations available.

New major release (changelog). See the instructions to update your system from EMC 2.4 to LinuxCNC 2.5.

Home

Forum

Hardware

CNC Machines

Help needed! SEI DT router 650.

Welcome, Guest

Forum

Hardware

CNC Machines

Help needed! SEI DT router 650.

Page:
1
2
3
4
5

TOPIC: Help needed! SEI DT router 650.

Re:Help needed! SEI DT router 650. 22 Фев 2011 03:55 #7374

BigJohnT
OFFLINE
Administrator
Posts: 4960
Thank you received: 87
Karma: 134

You would need the original control program to run that machine through the serial port. It sounds like a "smart" controller ie a controller that handles the motion calculations. This type of controller requires usually a proprietary program to control it.

EMC only works with dumb drives ie drives that take step and direction or velocity/torque with position feedback as the motion calculations are done in EMC.

Does the machine have DC servos? Do you have a photo of the machine and drives?

John

The administrator has disabled public write access.

Re:Help needed! SEI DT router 650. 22 Фев 2011 11:12 #7384

Borideleon OFFLINE Junior Boarder Posts: 22 Karma: 0	Here is picture from the manual i recently got from SEI. I will post actual photo later on. Attachments: This attachment is hidden for guests. Please log in or register to see it.
	Last Edit: 22 Фев 2011 11:16 by Borideleon. The administrator has disabled public write access.

Re:Help needed! SEI DT router 650. 22 Фев 2011 11:18 #7385

Borideleon OFFLINE Junior Boarder Posts: 22 Karma: 0	Another one. Attachments: This attachment is hidden for guests. Please log in or register to see it.
	Last Edit: 22 Фев 2011 11:21 by Borideleon. The administrator has disabled public write access.

Re:Help needed! SEI DT router 650. 22 Фев 2011 11:22 #7386

Borideleon OFFLINE Junior Boarder Posts: 22 Karma: 0	and this one.
	The administrator has disabled public write access.

Re:Help needed! SEI DT router 650. 22 Фев 2011 23:45 #7396

Borideleon OFFLINE Junior Boarder Posts: 22 Karma: 0	On the second look, it seems this router use stepper motor.
	The administrator has disabled public write access.

Re:Help needed! SEI DT router 650. 23 Фев 2011 00:56 #7397

step4linux OFFLINE Expert Boarder Posts: 157 Karma: 5	2.3 Motor X, Y, W axes are digitally loop-controlled for speed and position via optical encoder sounds like a servo Gerd
	Last Edit: 23 Фев 2011 00:57 by step4linux. The administrator has disabled public write access.