NEWS
LinuxCNC 2.5.2 Release
There are no translations available.

LinuxCNC 2.5.2 Update Released (changelog).
 
LinuxCNC 2.5.1 Release
There are no translations available.

LinuxCNC 2.5.1 Update Released (changelog). If the Package Manager does not prompt you to upgrade see this page.
 
LinuxCNC 2.5.0 Release
There are no translations available.

New major release (changelog). See the instructions to update your system from EMC 2.4 to LinuxCNC 2.5.
 
Home Forum Hardware CNC Machines Mori sl-3 retrofit

Welcome, Guest
Username: Password: Remember me
Forgot your password? Forgot your username?
  • Page:
  • 1

TOPIC: Mori sl-3 retrofit

Mori sl-3 retrofit 29 Май 2012 16:57 #20500

  • clkeck1
  • clkeck1's Avatar
  • OFFLINE
  • Expert Boarder
  • Posts: 91
  • Karma: 2
I'm looking at buying a 79 mori sl-3 lathe with a yasnac 2000 control.

Does anyone have any experience with this machine?
Are the drives analog input?
What does the turret use to determine position?

This should be a much easier retrofit than the Mv 35/40 I did last year as long as there aren't any snags.

Thanks
Cory
The administrator has disabled public write access.
  • Page:
  • 1
Moderators: cncbasher
Time to create page: 1.606 seconds
Powered by Kunena Forum
© 2013 LinuxCNC.org
Joomla! is Free Software released under the GNU General Public License.