NEWS
LinuxCNC 2.5.2 Release
There are no translations available.

LinuxCNC 2.5.2 Update Released (changelog).
 
LinuxCNC 2.5.1 Release
There are no translations available.

LinuxCNC 2.5.1 Update Released (changelog). If the Package Manager does not prompt you to upgrade see this page.
 
LinuxCNC 2.5.0 Release
There are no translations available.

New major release (changelog). See the instructions to update your system from EMC 2.4 to LinuxCNC 2.5.
 
Home Forum Configuring LinuxCNC pyVCP Re:pyVCP Online Documents

Welcome, Guest
Username: Password: Remember me
Forgot your password? Forgot your username?
  • Page:
  • 1
  • 2

TOPIC: Re:pyVCP Online Documents

Re:Led 14 Апр 2009 05:08 #90

  • BigJohnT
  • BigJohnT's Avatar
  • OFFLINE
  • Administrator
  • Posts: 4955
  • Thank you received: 86
  • Karma: 134
Just to add a bit to what Alex said...

A little reading material is here:

www.linuxcnc.org/docview/devel/html//hal_basic_hal.html#r1_1_4

Also a good way to find out what is connected to what open up the HAL Configuration window from the Machine menu. You can find the signal names and click on them and see what is connected and you can see what pins have what connected to them.

www.linuxcnc.org/docview/devel/html//hal_basic_hal.html#r1_1

John
The administrator has disabled public write access.

Re:Led 15 Апр 2009 22:11 #109

  • pleezwrite
  • pleezwrite's Avatar
  • OFFLINE
  • Fresh Boarder
  • Posts: 8
  • Karma: 0
Thanks guys for the help, its all ok and understood now!

Adam
Uses EMC for: 3 axis mill, 2 axis CNC heater
Company profile: recumbent bicycle manufacturer
The administrator has disabled public write access.

Re:pyVCP Online Documents 21 Апр 2011 03:45 #9216

  • piasdom
  • piasdom's Avatar
  • OFFLINE
  • Platinum Boarder
  • Posts: 537
  • Karma: 2
if it doesn't start, check for errors in syntax.(i do that a lot:)
what is the error message ? in the error message there is
a debug section. i usually look there first.








OOPS.....i need to read "THE LAST" post :)
Last Edit: 21 Апр 2011 03:49 by piasdom.
The administrator has disabled public write access.

Re:pyVCP Online Documents 17 Дек 2011 08:38 #15774

  • cmorley
  • cmorley's Avatar
  • OFFLINE
  • Moderator
  • Posts: 1488
  • Thank you received: 40
  • Karma: 89
show the error code ,HAL code and XML file and we could help more specifically
The administrator has disabled public write access.
  • Page:
  • 1
  • 2
Time to create page: 1.501 seconds
Powered by Kunena Forum
© 2013 LinuxCNC.org
Joomla! is Free Software released under the GNU General Public License.