LinuxCNC Support Forum :: Topic: pncconf

NEWS

LinuxCNC 2.5.2 Release

There are no translations available.

LinuxCNC 2.5.2 Update Released (changelog).

LinuxCNC 2.5.1 Release

There are no translations available.

LinuxCNC 2.5.1 Update Released (changelog). If the Package Manager does not prompt you to upgrade see this page.

LinuxCNC 2.5.0 Release

There are no translations available.

New major release (changelog). See the instructions to update your system from EMC 2.4 to LinuxCNC 2.5.

Home

Forum

Configuring LinuxCNC

PnCConf Wizard

pncconf - feature requests

Welcome, Guest

Forum

Configuring LinuxCNC

PnCConf Wizard

pncconf - feature requests

Page:
1
...
3
4
5
6
7
...
13

TOPIC: pncconf - feature requests

Re:pncconf - feature requests 02 Ott 2011 20:39 #13616

cmorley
OFFLINE
Moderator
Posts: 1520
Thank you received: 41
Karma: 89

Peter do you mean for instance the 7i76 could have different components depending on something like dip switches on the board?
While I'd like PNCconf to read live systems ( and I think Andy is thinking on a mechanism) most things are predictable.
Of course it requires the user to select the right answers, which is unpredictable - but that is no worse then someone hand writing a HAL file.

For the 5i25 the user must know what firmware the board was programmed for and pick that firmware in PNCconf.
Then the user must pick the right sserial daughterboard in the right sserial channel.
then what choices are there in the sserial daughter board?

Do you see one 5i25 firmware / daughter board choice that will be heads above more popular?

Chris M

The administrator has disabled public write access.

Re:pncconf - feature requests 06 Ott 2011 18:09 #13722

cmorley OFFLINE Moderator Posts: 1520 Thank you received: 41 Karma: 89	Can anyone post a print out of the HAL pins when the 7i76 is connected to the 5i25. Thanks.
	The administrator has disabled public write access.

Re:pncconf - feature requests 06 Ott 2011 18:16 #13723

andypugh OFFLINE Moderator Posts: 4245 Thank you received: 152 Karma: 130	Not yet. (I don't know how to wire up the 7i76 yet)
	Last Edit: 06 Ott 2011 18:19 by andypugh. The administrator has disabled public write access.

Re:pncconf - feature requests 06 Ott 2011 19:27 #13725

PCW
OFFLINE
Moderator
Posts: 1718
Thank you received: 92
Karma: 116

The 7I76 can have different HAL pins depending on mode (user settable) and firmware version. Also you can connect an external SSERIAL card to the 7I76 and that card has the same possibilities, though it will show up as a a SSERIAL device
under the main FPGA card.

Only the older SSERIAL cards like the 8I20 and 7I64 have fixed pins, all new cards have modes and new modes with new pins may be added.

The administrator has disabled public write access.

Re:pncconf - feature requests 11 Ott 2011 08:24 #13835

ericson OFFLINE Fresh Boarder Posts: 13 Karma: 0	hi does anyone know if there is a firmware for the 7i43 and 7i48 I have EMC2 2.5
	The administrator has disabled public write access.

Re:pncconf - feature requests 11 Ott 2011 08:27 #13836

BigJohnT NOW ONLINE Administrator Posts: 5082 Thank you received: 102 Karma: 136	www.linuxcnc.org/component/option,com_ku...d,2183/lang,english/
	The administrator has disabled public write access.

Re:pncconf - feature requests 11 Ott 2011 10:21 #13837

ericson OFFLINE Fresh Boarder Posts: 13 Karma: 0	I'm sorry I'm a newbie on this
	The administrator has disabled public write access.

Re:pncconf - feature requests 11 Ott 2011 17:01 #13848

BigJohnT NOW ONLINE Administrator Posts: 5082 Thank you received: 102 Karma: 136	No problem the best way is to start a new thread with a subject that reflects your question. This makes it easier to find at a later date by newbee's. John
	The administrator has disabled public write access.

Re:pncconf - feature requests 25 Ott 2011 12:19 #14246

cncbasher OFFLINE Moderator Posts: 761 Thank you received: 35 Karma: 53	how about adding in a copy configuration , or backup to file yes i know we can all use the keyboard but once you have a known good configuration , it would be helpful to know you have it all backed up or can copy to a new config for further modification including all the hidden files
	The administrator has disabled public write access.

Re:pncconf - feature requests 25 Ott 2011 21:20 #14266

cmorley OFFLINE Moderator Posts: 1520 Thank you received: 41 Karma: 89	actually all you need to do is load the config that you want to copy in pncconf and change the config name on the basic page and then run to the end. It will save the config with the name you picked.
	The administrator has disabled public write access.