NEWS
LinuxCNC 2.5.2 Release
There are no translations available.

LinuxCNC 2.5.2 Update Released (changelog).
 
LinuxCNC 2.5.1 Release
There are no translations available.

LinuxCNC 2.5.1 Update Released (changelog). If the Package Manager does not prompt you to upgrade see this page.
 
LinuxCNC 2.5.0 Release
There are no translations available.

New major release (changelog). See the instructions to update your system from EMC 2.4 to LinuxCNC 2.5.
 
Home Forum Configuring LinuxCNC PnCConf Wizard Mesa 5i25+7i77 plug-n-go configuration

Welcome, Guest
Username: Password: Remember me
Forgot your password? Forgot your username?

TOPIC: Mesa 5i25+7i77 plug-n-go configuration

Mesa 5i25+7i77 plug-n-go configuration 09 Mag 2012 04:39 #19939

  • ishman
  • ishman's Avatar
  • OFFLINE
  • Expert Boarder
  • Posts: 82
  • Karma: 0
I have just recieved my Mesa 5i25+7i77 plug-n-go.

I think I should be familiar with these new cards during my machine completion. Because it's still needs some enhancements.

Now to the first problem that, I downloaded the 5i25.zip file mesanet.com provides and unzipped the same at /lib/firmware/hm2/ But it shows error and later it cant let me choose 7i77. Is there something I am doing wrong ? When I browse the folders then there is some bit files but not any xml file.

Please help !
Last Edit: 09 Mag 2012 04:41 by ishman.
The administrator has disabled public write access.

Re:Mesa 5i25+7i77 plug-n-go configuration 09 Mag 2012 06:55 #19940

  • PCW
  • PCW's Avatar
  • OFFLINE
  • Moderator
  • Posts: 1668
  • Thank you received: 87
  • Karma: 116
We dont provide the xml files for pncconf so if you got that zip file from Mesa, most likely its a ini/hal file
set for the 5i25/7i77. These files (5i25-7i77.ini and hm2-servo7i77.hal) are basically the hm2-servo demo
ini/hal filesmodified for the 5I25/7I77 and belong in you local configuration directory = ~/linuxcnc/configs/hm2-servo/ . These files are for people that are _not_ using pncconf and want to setup their system by manual editing the ini/hal files (starting with the example files)
The administrator has disabled public write access.

Re:Mesa 5i25+7i77 plug-n-go configuration 09 Mag 2012 07:25 #19941

  • ishman
  • ishman's Avatar
  • OFFLINE
  • Expert Boarder
  • Posts: 82
  • Karma: 0
Thanks PCW

So, is there any guide or manual to setup these cards with linuxCNC ? Please let me know.
The administrator has disabled public write access.

Re:Mesa 5i25+7i77 plug-n-go configuration 09 Mag 2012 07:27 #19942

  • ishman
  • ishman's Avatar
  • OFFLINE
  • Expert Boarder
  • Posts: 82
  • Karma: 0
Also there is no hm2-servo file in /linuxcnc/configs/ and it's empty.
The administrator has disabled public write access.

Re:Mesa 5i25+7i77 plug-n-go configuration 09 Mag 2012 09:25 #19945

  • PCW
  • PCW's Avatar
  • OFFLINE
  • Moderator
  • Posts: 1668
  • Thank you received: 87
  • Karma: 116
There should be a hm2-servo directory in ~/linuxcnc/configs (notice the ~ which means home directory)
is this the latest live CD?
The administrator has disabled public write access.

Re:Mesa 5i25+7i77 plug-n-go configuration 09 Mag 2012 09:41 #19946

  • ishman
  • ishman's Avatar
  • OFFLINE
  • Expert Boarder
  • Posts: 82
  • Karma: 0
Actually I have two setups and I checked with the one with an old downloaded ubuntu10.04. I will try with the new one and then let you know. Thanks.

Btw. Can someone point me any guide where I can understand how to edit Mesa's supplied configs. Or where to start with these cards ?
The administrator has disabled public write access.
Moderators: cmorley
Time to create page: 0.911 seconds
Powered by Kunena Forum
© 2013 LinuxCNC.org
Joomla! is Free Software released under the GNU General Public License.