NEWS
LinuxCNC 2.5.2 Release
There are no translations available.

LinuxCNC 2.5.2 Update Released (changelog).
 
LinuxCNC 2.5.1 Release
There are no translations available.

LinuxCNC 2.5.1 Update Released (changelog). If the Package Manager does not prompt you to upgrade see this page.
 
LinuxCNC 2.5.0 Release
There are no translations available.

New major release (changelog). See the instructions to update your system from EMC 2.4 to LinuxCNC 2.5.
 
Home Forum Configuring LinuxCNC PnCConf Wizard Is this a bug?

Welcome, Guest
Username: Password: Remember me
Forgot your password? Forgot your username?
  • Page:
  • 1
  • 2

TOPIC: Is this a bug?

Re:Is this a bug? 03 Gen 2012 08:56 #16264

  • fgauder
  • fgauder's Avatar
  • OFFLINE
  • Junior Boarder
  • Posts: 38
  • Karma: 3
Peter and cncbasher,

Thanks for the responses. I had configured a much simpler 3 axis version and when I deleted the "net %s-vel-fb <=" line from each axis, EMC2 opened.
The administrator has disabled public write access.

Re:Is this a bug? 03 Gen 2012 11:36 #16267

  • PCW
  • PCW's Avatar
  • OFFLINE
  • Moderator
  • Posts: 1645
  • Thank you received: 86
  • Karma: 116
Note that simply deleting these lines is not really correct, you now have no D
term in your PID loop
What really should happen is that the %s should be replaced with x, y, or z (which one is pretty clear from 00 = x , 01 = y, 02 =z or just context)
The administrator has disabled public write access.

Re:Is this a bug? 03 Gen 2012 13:45 #16272

  • fgauder
  • fgauder's Avatar
  • OFFLINE
  • Junior Boarder
  • Posts: 38
  • Karma: 3
Thanks Peter! I put the line back in and edited it as you suggested, and it still works. It's usually what you don't know that you don't know that gets you.
The administrator has disabled public write access.

Re:Is this a bug? 03 Gen 2012 17:39 #16280

  • cmorley
  • cmorley's Avatar
  • NOW ONLINE
  • Moderator
  • Posts: 1487
  • Thank you received: 40
  • Karma: 89
Fgauder

Sorry for the bug getting you. I have pushed the fix.

You asked about line numbers when displaying HAL files.
If you are using Ubuntu you are probably viewing the HAL file with gedit...
Look under heading 'edit' then 'preferences'.
You should see a checkbox.

Cheers
The administrator has disabled public write access.

Re:Is this a bug? 03 Gen 2012 19:18 #16284

  • fgauder
  • fgauder's Avatar
  • OFFLINE
  • Junior Boarder
  • Posts: 38
  • Karma: 3
Thank you Mr. Morley
The administrator has disabled public write access.
  • Page:
  • 1
  • 2
Moderators: cmorley
Time to create page: 0.899 seconds
Powered by Kunena Forum
© 2013 LinuxCNC.org
Joomla! is Free Software released under the GNU General Public License.