NEWS
LinuxCNC 2.5.2 Release
There are no translations available.

LinuxCNC 2.5.2 Update Released (changelog).
 
LinuxCNC 2.5.1 Release
There are no translations available.

LinuxCNC 2.5.1 Update Released (changelog). If the Package Manager does not prompt you to upgrade see this page.
 
LinuxCNC 2.5.0 Release
There are no translations available.

New major release (changelog). See the instructions to update your system from EMC 2.4 to LinuxCNC 2.5.
 
Home Forum Configuring LinuxCNC ClassicLadder MODBUS TCP/IP ERRORs

Welcome, Guest
Username: Password: Remember me
Forgot your password? Forgot your username?
  • Page:
  • 1

TOPIC: MODBUS TCP/IP ERRORs

MODBUS TCP/IP ERRORs 26 Ott 2010 07:43 #4876

  • 315john
  • 315john's Avatar
  • OFFLINE
  • Fresh Boarder
  • Posts: 10
  • Karma: 0
Hello

I am using EMC2 and classic ladded to talk to a GE-30 PLC over modbus TCP/IP. I can write to the registers. My problem is that i keep getting a Modbus error screen with no information from classic ladder and sometimes will loose my communication all together until i restart emc. Everything worked great talking to the modbus PLC simulator.....

Can anyone help?

John
The administrator has disabled public write access.

Re:MODBUS TCP/IP ERRORs 26 Ott 2010 16:52 #4888

  • 315john
  • 315john's Avatar
  • OFFLINE
  • Fresh Boarder
  • Posts: 10
  • Karma: 0
I determined that the problems came from the cross over from the PLC simulator to the 90-30. I did not have the 1st modbus element loaded with the correct number
The administrator has disabled public write access.

Re:MODBUS TCP/IP ERRORs 27 Ott 2010 17:58 #4918

  • cmorley
  • cmorley's Avatar
  • OFFLINE
  • Moderator
  • Posts: 1487
  • Thank you received: 40
  • Karma: 89
Could you describe exactly how you use TCP ?
I could never get it to work.
The administrator has disabled public write access.

Re:MODBUS TCP/IP ERRORs 28 Ott 2010 05:42 #4927

  • 315john
  • 315john's Avatar
  • OFFLINE
  • Fresh Boarder
  • Posts: 10
  • Karma: 0
Yes i would be more than happy to help you... could you send me and example of what you are trying to connect to
The administrator has disabled public write access.

Re:MODBUS TCP/IP ERRORs 28 Ott 2010 23:14 #4956

  • cmorley
  • cmorley's Avatar
  • OFFLINE
  • Moderator
  • Posts: 1487
  • Thank you received: 40
  • Karma: 89
Well Classicladder actually can be set up as a slave.
But A modbus simulator would be good too.
The administrator has disabled public write access.

Re:MODBUS TCP/IP ERRORs 29 Ott 2010 07:24 #4962

  • 315john
  • 315john's Avatar
  • OFFLINE
  • Fresh Boarder
  • Posts: 10
  • Karma: 0
I am working on putting a little doc together for you
The administrator has disabled public write access.

Re:MODBUS TCP/IP ERRORs 30 Ott 2010 17:07 #4974

  • 315john
  • 315john's Avatar
  • OFFLINE
  • Fresh Boarder
  • Posts: 10
  • Karma: 0
Here is a PDF i put together to help you out. Let me know if you need anything else.
The administrator has disabled public write access.

Re:MODBUS TCP/IP ERRORs 30 Ott 2010 17:09 #4975

  • 315john
  • 315john's Avatar
  • OFFLINE
  • Fresh Boarder
  • Posts: 10
  • Karma: 0
hmm didnt work. i can email it to you
The administrator has disabled public write access.

Re:MODBUS TCP/IP ERRORs 30 Ott 2010 18:37 #4976

  • andypugh
  • andypugh's Avatar
  • NOW ONLINE
  • Moderator
  • Posts: 4111
  • Thank you received: 140
  • Karma: 129
Could you Wikify it? The EMC2 Wiki at wiki.linuxcnc.org/cgi-bin/emcinfo.pl is publicly editable. You just need to follow the instructions here: wiki.linuxcnc.org/cgi-bin/emcinfo.pl?BasicSteps to prove you are not a 'bot.
The administrator has disabled public write access.
  • Page:
  • 1
Time to create page: 1.550 seconds
Powered by Kunena Forum
© 2013 LinuxCNC.org
Joomla! is Free Software released under the GNU General Public License.