NEWS
LinuxCNC 2.5.2 Release
There are no translations available.

LinuxCNC 2.5.2 Update Released (changelog).
 
LinuxCNC 2.5.1 Release
There are no translations available.

LinuxCNC 2.5.1 Update Released (changelog). If the Package Manager does not prompt you to upgrade see this page.
 
LinuxCNC 2.5.0 Release
There are no translations available.

New major release (changelog). See the instructions to update your system from EMC 2.4 to LinuxCNC 2.5.
 
Home Forum Configuring LinuxCNC GUI's can help me anyone in linux?

Welcome, Guest
Username: Password: Remember me
Forgot your password? Forgot your username?
  • Page:
  • 1

TOPIC: can help me anyone in linux?

can help me anyone in linux? 29 Jul 2012 05:22 #22583

  • tux
  • tux's Avatar
  • OFFLINE
  • Fresh Boarder
  • Posts: 1
  • Karma: 0
Hi!

I have problems with my ubuntu 10.04 LTS system. The screen is not clear visible. The graphic and the characters are unreadable. I have attached screenshots of my screen, whats demonstrates the graphical problem. Before installing Ubuntu i used Windows XP which work without problems.

system specs: AMD Sempron 1600MHz, 1GB RAM, video: ATI Radeon 256MB

The question is: how can i fix the graphic problem?

p.s.: new in Linux.

sincerely Páldi Zoltán
The administrator has disabled public write access.

Re:can help me anyone in linux? 29 Jul 2012 06:15 #22585

  • BigJohnT
  • BigJohnT's Avatar
  • NOW ONLINE
  • Administrator
  • Posts: 4950
  • Thank you received: 85
  • Karma: 134
Might be a problem with the graphics driver or card. Some trouble shooting info here.

John
The administrator has disabled public write access.

Re:can help me anyone in linux? 30 Jul 2012 22:08 #22620

  • jmelson
  • jmelson's Avatar
  • OFFLINE
  • Moderator
  • Posts: 263
  • Thank you received: 10
  • Karma: 31
tux wrote:
Hi!

I have problems with my ubuntu 10.04 LTS system. The screen is not clear visible. The graphic and the characters are unreadable. I have attached screenshots of my screen, whats demonstrates the graphical problem. Before installing Ubuntu i used Windows XP which work without problems.

system specs: AMD Sempron 1600MHz, 1GB RAM, video: ATI Radeon 256MB

The question is: how can i fix the graphic problem?

p.s.: new in Linux.

sincerely Páldi Zoltán
It appears the character map has been scrambled. The lower-case e and i are messed up every place
they appear on the screen. Did you set this system up to default to a different language? Possibly that has
loaded a wrong font table. You might be able to go into the system config menu and select a different
language. Possibly then switching back to your language choice will get it set right.

Or, you may need to change the video card driver. If you are using the ATI driver, you
should try the default vga driver without the fancy hardware accelerations.

Jon
The administrator has disabled public write access.
  • Page:
  • 1
Time to create page: 0.861 seconds
Powered by Kunena Forum
© 2013 LinuxCNC.org
Joomla! is Free Software released under the GNU General Public License.