LinuxCNC Support Forum :: Topic: Gscreen - a GTK / Glade / Python based screen (1/81)

cmorley OFFLINE Moderator Posts: 1520 Thank you received: 41 Karma: 89	gscreen - large dro showing, gcode program showing ready to run, with modified blue-joy theme
	Last Edit: 18 Feb 2012 16:38 by cmorley. The administrator has disabled public write access.

Re:Gscreen - a GTK / Glade / Python based screen 18 Feb 2012 16:35 #17807

cmorley OFFLINE Moderator Posts: 1520 Thank you received: 41 Karma: 89	gscreen with large dro hidden , offsets showing, blue emerald theme:
	The administrator has disabled public write access.

Re:Gscreen - a GTK / Glade / Python based screen 18 Feb 2012 17:06 #17811

cmorley
OFFLINE
Moderator
Posts: 1520
Thank you received: 41
Karma: 89

gscreen patch to go against current as of now master.

adds fullscreen (not maximize - all of it!) capability
adds an embedded terminal for call debugging programs.
adds an option to use aux coolant instead of mist or flood
this was requested by my only tester cncbasher, it requires one to connect HAL to gscreens coolant pins instead of linxcnc's
fixed save and save-as for gcode edits.
probably some other stuff

This attachment is hidden for guests. Please log in or register to see it.

Attachments:

This attachment is hidden for guests. Please log in or register to see it.

The administrator has disabled public write access.

Re:Gscreen - a GTK / Glade / Python based screen 18 Feb 2012 17:11 #17812

cmorley OFFLINE Moderator Posts: 1520 Thank you received: 41 Karma: 89	Cncbasher had a problem when first opening gscreen because of the preference file. so here is a copy of a preference file if that happes. name it '.gscreen_prefences' (without quotes, note the period) and put it in your home file. This attachment is hidden for guests. Please log in or register to see it. Attachments: This attachment is hidden for guests. Please log in or register to see it.
	The administrator has disabled public write access. The following user(s) said Thank You: Diederik

Re:Gscreen - a GTK / Glade / Python based screen 18 Feb 2012 17:16 #17813

cmorley OFFLINE Moderator Posts: 1520 Thank you received: 41 Karma: 89	here is the patch as a compressed file - alot easier This attachment is hidden for guests. Please log in or register to see it. Attachments: This attachment is hidden for guests. Please log in or register to see it.
	Last Edit: 18 Feb 2012 17:16 by cmorley. The administrator has disabled public write access.

Re:Gscreen - a GTK / Glade / Python based screen 19 Feb 2012 03:53 #17825

cncbasher
NOW ONLINE
Moderator
Posts: 761
Thank you received: 35
Karma: 53

just about to take the step now of configuring without axis , for the first time , so jumping without a safety net ! ( only figuratively thank god )
but all seems to fit in well , touch screen is working fine , no difficultys selecting etc .

now a machine on togglebutton , with colour change red / green so you can see status perhaps
needs to be i think on the right side under the estop , or perhaps top left next to status .
in a similar style to the estop and led i think would suit better

Last Edit: 19 Feb 2012 03:55 by cncbasher.

The administrator has disabled public write access.

Re:Gscreen - a GTK / Glade / Python based screen 19 Feb 2012 05:43 #17828

BigJohnT NOW ONLINE Administrator Posts: 5082 Thank you received: 102 Karma: 136	I can't wait to get out to the shop and try this... way to go Chris! John
	The administrator has disabled public write access.

Re:Gscreen - a GTK / Glade / Python based screen 19 Feb 2012 09:43 #17834

Dan Falck OFFLINE Moderator Posts: 37 Thank you received: 2 Karma: 6	Looks very nice! Where is it located? (git repo?)
	The administrator has disabled public write access.

Re:Gscreen - a GTK / Glade / Python based screen 19 Feb 2012 10:44 #17836

cncbasher NOW ONLINE Moderator Posts: 761 Thank you received: 35 Karma: 53	look a few messages back Dan , and install against emc2-dev git repro , then rebuild shout if your stuck Dave
	The administrator has disabled public write access.

Re:Gscreen - a GTK / Glade / Python based screen 19 Feb 2012 11:18 #17837

cmorley OFFLINE Moderator Posts: 1520 Thank you received: 41 Karma: 89	it's in git repo of my private computer. If it proves worthwhile and functional I will incorporate in linuxcnc. right now still experimenting, though it will run a standard machine. Chris M I warn you - its still being developed and tested please test in a simulated config. there are a couple hidden features that could move the machine unexpectedly.
	Last Edit: 19 Feb 2012 11:26 by cmorley. The administrator has disabled public write access.