LinuxCNC Support Forum :: Topic: Gcodetools - Inkscape's CAM extension (5/9)

steeley OFFLINE Junior Boarder Posts: 28 Karma: 0	Thanks Nick, It was working on InkScape (Mac), but not in InkScape(Linux). I have reset InkScape (Linux) and it does select the paths. Maybe I had a strange setting somewhere. Cheers, Ian
	The administrator has disabled public write access.

Re:Gcodetools - Inkscape's CAM extension 31 Okt 2011 11:58 #14472

serugio OFFLINE Fresh Boarder Posts: 1 Karma: 0	very good job nick,..is excellent......did u know freecad??....i want to make the plug in cam up to 4th axis...so i think u r the right ones..to help this proyect...freecad is parametric...so...nice to meet smart people like u...
	The administrator has disabled public write access.

Re:Gcodetools - Inkscape's CAM extension 17 Jul 2012 02:57 #22066

jpka OFFLINE Senior Boarder Posts: 40 Thank you received: 2 Karma: 3	Hi! Nick, thank you so much for your tools, it's very useful! I suddenly develop true vector font for engraving. ASCII, Cyrillic (and some EU chars/signs) present. Can anybody please try to use it (with Inkscape + Gcodetools) and post here photo of result? Please also read here https://bugs.launchpad.net/inkscape/+bug/716676/. Thank you! =)
	The administrator has disabled public write access.

Re:Gcodetools - Inkscape's CAM extension 17 Jul 2012 02:58 #22067

jpka OFFLINE Senior Boarder Posts: 40 Thank you received: 2 Karma: 3	File attached This attachment is hidden for guests. Please log in or register to see it. Edit #2: This is .tar.bz2 file Attachments: This attachment is hidden for guests. Please log in or register to see it.
	Last Edit: 17 Jul 2012 03:08 by jpka. The administrator has disabled public write access.

Re:Gcodetools - Inkscape's CAM extension 17 Jul 2012 08:08 #22088

Nick OFFLINE Senior Boarder Posts: 77 Thank you received: 1 Karma: 5	I can not cut it, but in LinuxCNC it looks fine:
	The administrator has disabled public write access.

Re:Gcodetools - Inkscape's CAM extension 07 Sep 2012 12:28 #24040

777funk
OFFLINE
Fresh Boarder
Posts: 16
Karma: -1

Great looking software.

Is it possible to have an entire sequence of cut features (pockets, profiles etc) and change the order in which they are executed/cut?

i.e. say you have:

-Pocket Routine 1
-Pocket Routine 2
-4 holes to drill in one routine
-1 Engrave Routine
-Then the final Profile

Could I easily switch the sequence in which this happens? In some CAM software you just click on the name of the routine and drag it to where you want it in the cut sequence.

Last Edit: 07 Sep 2012 12:36 by 777funk.

The administrator has disabled public write access.