NEWS
LinuxCNC 2.5.4 Release
There are no translations available.

LinuxCNC 2.5.4 Update Released (changelog).
 
LinuxCNC 2.5.3 Release
There are no translations available.

LinuxCNC 2.5.3 Update Released (changelog).
 
LinuxCNC 2.5.2 Release
There are no translations available.

LinuxCNC 2.5.2 Update Released (changelog).
 

Welcome, Guest
Username: Password: Remember me

TOPIC: 7i43 and 7i48

Re:7i43 and 7i48 16 Fév 2012 22:46 #17749

  • cmorley
  • cmorley's Avatar
  • OFFLINE
  • Moderator
  • Posts: 1852
  • Thank you received: 98
  • Karma: 96
try this xml file: This attachment is hidden for guests. Please log in or register to see it.
Attachments:
  • Attachment This attachment is hidden for guests. Please log in or register to see it.
The administrator has disabled public write access.

Re:7i43 and 7i48 17 Fév 2012 00:45 #17750

  • PKM
  • PKM's Avatar
  • OFFLINE
  • Expert Boarder
  • Posts: 105
  • Thank you received: 1
  • Karma: 4
Thank you, Chris!
It works
The administrator has disabled public write access.

Re:7i43 and 7i48 17 Fév 2012 07:00 #17759

  • PKM
  • PKM's Avatar
  • OFFLINE
  • Expert Boarder
  • Posts: 105
  • Thank you received: 1
  • Karma: 4
Some bugs for 7i48:
pwmgen.##.output-type should be 2
"Test open loop" works for axis 0 only
When opening in pncconf saved config with SVST_6_6, the default TPEN_4_5 is shown instead.
The administrator has disabled public write access.

Re:7i43 and 7i48 17 Fév 2012 20:50 #17781

  • cmorley
  • cmorley's Avatar
  • OFFLINE
  • Moderator
  • Posts: 1852
  • Thank you received: 98
  • Karma: 96
PKM

You must select 'up/down mode' in the pintype combo box to have pncconf use output type 2. Did you do that?

You say axis 0 do you mean X axis ? what happens with the other axis?

You typed 'SVST_6_6' is that a typo on your part? The name is 'SVST6_6'
I can't repeat this error. the config used the proper name. Something else must have gone on.

Chris M
The administrator has disabled public write access.

Re:7i43 and 7i48 18 Fév 2012 04:22 #17790

  • PKM
  • PKM's Avatar
  • OFFLINE
  • Expert Boarder
  • Posts: 105
  • Thank you received: 1
  • Karma: 4
You must select 'up/down mode' in the pintype combo box to have pncconf use output type 2. Did you do that?
I did not see it first. Now I found the option, thank you!
You say axis 0 do you mean X axis ? what happens with the other axis?
Yes, I mean X axis, which I assigned to PWM 0.
For other axes analog output remains 0 and enable outputs won't work.
It's probably because 7i48 has one common enable instead of per axis.
I guess that only hm2_7i43.0.pwmgen.00.enable works but others don't.
Of course when I start the machine hm2_7i43.0.pwmgen.00.enable actually enables all outputs and that's ok.
But in Pncconf only one axis can be tested.
You typed 'SVST_6_6' is that a typo on your part? The name is 'SVST6_6'
Yes I mistyped here.
I can't repeat this error. the config used the proper name. Something else must have gone on.
I just created another new config with SVST6_6, saved it, shut down pncconf, started it again and TPEN4_5 shows too.
But when I create a new config with another firmware SVST6_6_7I48 that I added to pncconf, it saves all parameters. So it's maybe just something odd.
Last Edit: 18 Fév 2012 04:24 by PKM.
The administrator has disabled public write access.

Re:7i43 and 7i48 18 Fév 2012 11:29 #17799

  • cmorley
  • cmorley's Avatar
  • OFFLINE
  • Moderator
  • Posts: 1852
  • Thank you received: 98
  • Karma: 96
I will look into the open loop test problem.
Thanks for your bug reports!
The administrator has disabled public write access.
Moderators: cmorley
Time to create page: 0.815 seconds
Powered by Kunena Forum
© 2014 LinuxCNC.org
Joomla! is Free Software released under the GNU General Public License.