7i43 and 7i48
11 Oct 2011 17:24 #13838
by ericson
7i43 and 7i48 was created by ericson
hi does anyone know if there is
a firmware for the 7i43 and 7i48
I have EMC2 2.5
a firmware for the 7i43 and 7i48
I have EMC2 2.5
Please Log in or Create an account to join the conversation.
11 Oct 2011 17:44 #13839
by PCW
Replied by PCW on topic Re:7i43 and 7i48
I know there's one for the 400K model:
freeby.mesanet.com/SVST6_6.BIT
freeby.mesanet.com/SVST6_6.PIN
freeby.mesanet.com/SVST6_6.BIT
freeby.mesanet.com/SVST6_6.PIN
Please Log in or Create an account to join the conversation.
11 Oct 2011 18:59 #13842
by ericson
Replied by ericson on topic Re:7i43 and 7i48
ok. will it works with pncconf.
Please Log in or Create an account to join the conversation.
11 Oct 2011 21:07 #13846
by PCW
Replied by PCW on topic Re:7i43 and 7i48
I dont think so
Please Log in or Create an account to join the conversation.
12 Oct 2011 00:19 #13851
by cmorley
Replied by cmorley on topic Re:7i43 and 7i48
The 7i48 uses muxed encoders, which PNCconf can partially handle.
PNCconf will only see the even numbered encoders, you would have to write HAL code if you want to use the odd numbered encoders.
If that is good enough for you I can make a file for you so you can use the firmware in PNCconf that Peter sent a link for.
PNCconf will only see the even numbered encoders, you would have to write HAL code if you want to use the odd numbered encoders.
If that is good enough for you I can make a file for you so you can use the firmware in PNCconf that Peter sent a link for.
Please Log in or Create an account to join the conversation.
12 Oct 2011 05:24 #13852
by ericson
Replied by ericson on topic Re:7i43 and 7i48
it would be really nice
that would help me a lot
Thanks.
that would help me a lot
Thanks.
Please Log in or Create an account to join the conversation.
Moderators: cmorley
Time to create page: 0.062 seconds