All free soft from Design up to Manufacturing !

Start
Prev
1
Next
End

laurent_parti
Offline
Junior Member

10 May 2013 17:00 #33875 by laurent_parti

All free soft from Design up to Manufacturing ! was created by laurent_parti

Hi all,

Here is a short video showing all the CNC process with free soft. Hope it could help:

Short video

Please Log in or Create an account to join the conversation.

andypugh
Offline
Moderator

10 May 2013 18:57 #33881 by andypugh

Replied by andypugh on topic All free soft from Design up to Manufacturing !

I use some of the same tools, though I start with Autodesk Inventor. You _could_ start with Inventor Fusion, which is free (but not Free)
I need to try FreeCAD again. It was a bit incomplete last time I looked.

Please Log in or Create an account to join the conversation.

laurent_parti
Offline
Junior Member

11 May 2013 02:57 - 12 May 2013 16:19 #33904 by laurent_parti

Replied by laurent_parti on topic All free soft from Design up to Manufacturing !

Hello andy,

Freecad has made huge improvements. You have some tuto on youtub it's very powerfull

Their web site also share many infos.

Last edit: 12 May 2013 16:19 by laurent_parti.

Please Log in or Create an account to join the conversation.

AggieMEEN
Offline
Junior Member

17 May 2013 06:22 #34217 by AggieMEEN

Replied by AggieMEEN on topic All free soft from Design up to Manufacturing !

Hello,

What is the 2D CAM package you were using? This was around 2:55 into the video and showed the part in a wood texture.

Please Log in or Create an account to join the conversation.

laurent_parti
Offline
Junior Member

17 May 2013 15:07 #34227 by laurent_parti

Replied by laurent_parti on topic All free soft from Design up to Manufacturing !

Hello Aggie,

At 2:55 it is the free trial of Vectric cut 2D I tried from a DXF file to make a benchmark with PyCam. But it is a commercial soft. PyCam is free like dxftogcode written in python.

:laugh:

Please Log in or Create an account to join the conversation.

Start
Prev
1
Next
End

Moderators: Skullworks

Time to create page: 0.076 seconds