LinuxCNC 2.6 GUI Error

More
24 Apr 2014 00:45 #46263 by fire_lizard
Hi everyone,

I have just built LinuxCNC from source, but, when I work with it, I encounter the following problem:

pncconf and stepconf wizards work without problems, when I run . ./rip-environment and then linuxcnc I get GUI running as well, but when I choose configuration and double-click on it I get this error:

_tkinter.TclError: couldn't load file "/home/test/linuxcnc-master/tcl/linuxcnc.so": /home/test/linuxcnc-master/tcl/linuxcnc.so: undefined symbol: Tk_MainWindow

and the program terminates.

Does anyone know possible workarounds?

Thanks in advance

Please Log in or Create an account to join the conversation.

More
24 Apr 2014 08:00 #46275 by fire_lizard
Replied by fire_lizard on topic LinuxCNC 2.6 GUI Error
Actually found solution:

I had to reconfigure using this command:

./configure --with-tkConfig=/usr/lib/tk8.6/tkConfig.sh --with-tclConfig=/usr/lib/tcl8.6/tclConfig.sh

Please Log in or Create an account to join the conversation.

Time to create page: 0.097 seconds
Powered by Kunena Forum