Example configuration for 5i24

More
26 Jul 2014 18:17 - 26 Jul 2014 18:53 #49169 by vre
Is there any example configuration for lathe+5i24(or other mesa pci) with /*comments*/ ?
The exact configuration iam searching is 2 axis lathe with 2 servos (step-dir) with quadrature ABZ feedbacks with 4inputs and 4 outputs + 1pwm for spindle (pwm,direction,enable) , 4 limit switches, watchdog and the remaining pins GPIO

I know that i will not find exactly this configuration but i want a base config to start..
thank you.
Last edit: 26 Jul 2014 18:53 by vre.

Please Log in or Create an account to join the conversation.

More
27 Jul 2014 21:13 #49185 by PCW
Replied by PCW on topic Example configuration for 5i24
I think for that configuration (lathe + step/dir with feedback) you are going to have to synthesize a HAL and INI file
from:

1 A generic lathe config

linuxcnc.org/docs/html/config/lathe_config.html

describes the main differences in a a lathe config from a mill config
and there are sample lathe configs included with linuxcnc

2. A step/dir with encoder feedback configuration

freeby.mesanet.com/3x20encstep.zip

Is an example of the hal connections for a Hostmot2 step/dir
closted loop system with encoder feedback

(the card name needs to be changed from 3X20 to 5I24)
The following user(s) said Thank You: vre

Please Log in or Create an account to join the conversation.

Time to create page: 0.062 seconds
Powered by Kunena Forum