problem homming and jog axis

More
24 Jul 2014 23:24 #49094 by jlviloria
good day,

I have a machine that has the micro to the home, standing before her, is on the left.

the machine was going in the opposite direction to be referenced.

reading in the forum I found that changing the parameters (max_limit and MIN_LIMIT) solves the problem. and partly I fix.

but when the machine makes the process of home, and want to move the X or Y axis shows the machine over-travel alarm me, is exactly this:

"cant join further jog past max soft limit"

as I can fix this problem

thanks,


Jorge Viloria

Please Log in or Create an account to join the conversation.

Time to create page: 0.100 seconds
Powered by Kunena Forum