NEWS
LinuxCNC 2.5.2 Release
LinuxCNC 2.5.2 Update Released (changelog).
 
LinuxCNC 2.5.1 Release

LinuxCNC 2.5.1 Update Released (changelog). If the Package Manager does not prompt you to upgrade see this page.
 
LinuxCNC 2.5.0 Release
New major release (changelog). See the instructions to update your system from EMC 2.4 to LinuxCNC 2.5.
 
Home Forum Configuring LinuxCNC GladeVCP GladeVCP

Welcome, Guest
Username: Password: Remember me
Forgot your password? Forgot your username?

TOPIC: GladeVCP

Re:GladeVCP 12 Sep 2011 08:53 #13127

  • psha
  • psha's Avatar
  • OFFLINE
  • Moderator
  • Posts: 107
  • Karma: 22
Look into example - homing is implemented using gladevcp Actions, not HAL pins.
So there is nothing in HAL space that represents gladevcp Home action.
Maybe you'll catch me at #emc again? :)
The administrator has disabled public write access.

Re:GladeVCP 12 Sep 2011 09:02 #13128

  • piasdom
  • piasdom's Avatar
  • OFFLINE
  • Platinum Boarder
  • Posts: 537
  • Karma: 2
cool, thanks....i found what your talking about


kenneth
The administrator has disabled public write access.

Re:GladeVCP 13 Sep 2011 04:00 #13158

  • piasdom
  • piasdom's Avatar
  • OFFLINE
  • Platinum Boarder
  • Posts: 537
  • Karma: 2
the emc toggleaction estop and reload don't do anything. except the estop turns power off
and reload does nothing. and in the below, says 'button' doesn't exist but no error with the 'led'.
this "IS" where i link the glade pin/signals ? if not, say so and i'll continue reading. :)


postgui.hal
net glade_estop_led gladevcp.Estop_led gladevcp.Estop_button

Thanks
kenneth
The administrator has disabled public write access.

Re:GladeVCP 13 Sep 2011 05:15 #13164

  • psha
  • psha's Avatar
  • OFFLINE
  • Moderator
  • Posts: 107
  • Karma: 22
Again and again you are trying to connect HAL pin to gladevcp action...
Regarding reload - probably it's a bug. I'll take a look in the evening
The administrator has disabled public write access.

Re:GladeVCP 13 Sep 2011 05:22 #13165

  • piasdom
  • piasdom's Avatar
  • OFFLINE
  • Platinum Boarder
  • Posts: 537
  • Karma: 2
in your example you have the below. maybe i misunderstood this.
i was trying to do that.

panel.hal
net button-state gladevcp.hal_togglebutton1 => gladevcp.hal_led1
The administrator has disabled public write access.

Re:GladeVCP 13 Sep 2011 05:48 #13166

  • psha
  • psha's Avatar
  • OFFLINE
  • Moderator
  • Posts: 107
  • Karma: 22
That was general purpose gladevcp togglebutton with output hal pin.
If you want estop you should take togglebutton/toggletoolbutton/etc and connect it to ESTOP ToggleAction using glade.
That's two different things
The administrator has disabled public write access.
Moderators: mhaberler
Time to create page: 1.133 seconds
Powered by Kunena Forum
© 2013 LinuxCNC.org
Joomla! is Free Software released under the GNU General Public License.