Welcome to LinuxCNC.org

Well, I think I did a successfull update, the emc now reports as 2.5.0-28-g53433da I believe this is the master version, I also tried the build version. It still does not show the 5i25 on the pncconf setup screen as a choice, there are several other mesa boards listed. I was originally on the livecd version before the update. When the update installed, it flashed a couple of messages about something that it was unable to install because of a dependency, it flashes by so fast that I did not catch the details unfortunately. As a note, this is a clean computer, that was freshly formatted with the livecd install, no changes have been made other than updating emc as requested.

My docs for emc are now dated May 1 so they apparently updated as well.

So, any suggestions on why I am not seeing the 5i25 and 7i76 available for selection still?

Thanks,
George

Follow the instructions in post http://www.linuxcnc.org/index.php/english/component/kunena/?func=view&catid=39&id=14940&limit=6&start=42#18554 to create the 5i25 directory. Then the 5i25 and 7i76 will show up.

Stan

Those instructionsin that link are flawed or not complete. It has you copy the unzipped folder into the hm2 directory. That does not work, I believe the folder needs to be renamed to 5i25 first. Even then, renaming it and putting it in the hm2 folder it throws a error in pncconf. (I think a XML files is also required, that folder only has a .py file) The 5i25 does show but when you select it and go forward to the next screen in pncconf a error message comes up " unbound local error, local variable search referenced before assignment".

I was under the impression that all the fixes to date, as well as creating that folder and contents would have been taken care of by me updating to the latest master of 2.5, but it wasn't.

The folder you referenced in your post only has a single file in it, a py file, I believe a XML file is also required. BUT, those files and folders in this thread are old, there have been more fixes. I just want to get up to date on the latest pncconf and support files for the 5i25/7i76 to have a better chance of getting the boards interfaced correctly.

Hopefully Chris can shed some light on what is going on with the latest 2.5 master not handling these boards directly without having to patch in additional files and folders. I was under the impression all this was incorporated into the 2.5 master.

In particular, the correct handling of the terminal strip names and pin assignments along with spindle control.

Ok. Use the slightly earlier post www.linuxcnc.org/index.php/english/compo...mit=6&start=42#16133

It worked for me. I used a new LiveCD to install LinuxCNC and created the lib/firmware/hm2/5i25 folder with the xml files using the instructions above.

Sorry for the difficulty.

Stan

Thanks Stan. I think I had it working to that point before Chris suggested updating my ver 2.5 to the build ver. I am pretty sure that Chris put all the latest pieces into the 2.5 build,, I don't understand why they are not showing up without having to manually enter files/folders????? I figure Chris would be interested to know, maybe his changes did NOT get into the build version like he thought???

PS I tried both the build version and then the master version afterwards just in case.

Sorry for the delay of answer ...connection problems.

even with my updates you will still need to add the 5i25 folder and xml files to lib/firmware/hm2
firmware is a separate repository and I don't have any commit privileges for it - so can not add the files automatically.
there has been talk for some work in that department....

FYI anything with 2.5 is not master (master is 2.6 at the moment)
By using the 2.5 buildbot version you are getting bug fixes before they are officially released.

Chris M