LinuxCNC Support Forum :: Topic: Help needed! SEI DT router 650. (5/5)

NEWS

LinuxCNC 2.5.2 Release

LinuxCNC 2.5.2 Update Released (changelog).

LinuxCNC 2.5.1 Release

LinuxCNC 2.5.1 Update Released (changelog). If the Package Manager does not prompt you to upgrade see this page.

LinuxCNC 2.5.0 Release

New major release (changelog). See the instructions to update your system from EMC 2.4 to LinuxCNC 2.5.

Home

Forum

Hardware

CNC Machines

Help needed! SEI DT router 650.

Welcome, Guest

Forum

Hardware

CNC Machines

Help needed! SEI DT router 650.

Page:
1
2
3
4
5

TOPIC: Help needed! SEI DT router 650.

Re:Help needed! SEI DT router 650. 02 Mar 2011 03:09 #7534

andypugh
OFFLINE
Moderator
Posts: 4109
Thank you received: 140
Karma: 129

A Z80? Wow!

What numbers are on the devices bolted to the heatsinks on the middle board?

What you have is effectively a printer. HPGL is a printer/plotter control language and with the right (generic) drivers you ought to be able to simply print to your engraver from any graphics package. (Best results will be from vector graphics software).
A quick Google suggests that Inkscape will output HPGL.

Alternatively, if you want to control the machine as a CNC machine using EMC2 and G-code you are looking at a complete retrofit, replacing the motor drives and controller (but you should be able to retain the motors and encoders).
Deciding the best way to retrofit does require knowing what the motors are (stepper or servo). The fact that I see 4 tracks to each motor on the backplane makes me suspect stepper, but one could easily be an earth.

The administrator has disabled public write access.

Re:Help needed! SEI DT router 650. 02 Mar 2011 03:52 #7536

Borideleon OFFLINE Junior Boarder Posts: 22 Karma: 0	I just got a reply from SEI support. this machine runs with our software CCI, or with a software that use HPGL standard command (for example Autocad).
	The administrator has disabled public write access.

Re:Help needed! SEI DT router 650. 03 Mar 2011 04:30 #7557

Borideleon OFFLINE Junior Boarder Posts: 22 Karma: 0	writing on system board
	The administrator has disabled public write access.

Re:Help needed! SEI DT router 650. 03 Mar 2011 04:32 #7558

Borideleon OFFLINE Junior Boarder Posts: 22 Karma: 0	and another view
	The administrator has disabled public write access.

Re:Help needed! SEI DT router 650. 03 Mar 2011 05:05 #7559

andypugh OFFLINE Moderator Posts: 4109 Thank you received: 140 Karma: 129	Put a sticker/label on that chip with a window in it. That's an EPROM, and can be erased by UV light.
	The administrator has disabled public write access.

Re:Help needed! SEI DT router 650. 15 May 2012 11:47 #20115

garyinspringhill
OFFLINE
Fresh Boarder
Posts: 4
Karma: 1

If all you need is 2 or 2.5d hpgl you can also use Tux Plot (google for it) it's a nice compliment to linuxcnc for machines needing hpgl output.
Also you may only be plotting just the corner because the machine's 0,0 coordinate is at the center of your workspace and NOT in the lower left like most machines. Tux Plot has a toggle that will overcome this problem for you.
The tricky part will be finding out the "z" axis command as each company seems to use a diff. command for z, once it's found out you can edit the z command in Tux Plot using the edit commands button.
Need any help email me..

The administrator has disabled public write access.