esab ultrarex retro fit plasma / flame cutter

More
31 May 2012 22:50 #20543 by BigJohnT
Looks OK to me. Yes, you need M2 in files used as named subroutines.

linuxcnc.org/docview/html/gcode/o-code.html#_calling_files

John

Please Log in or Create an account to join the conversation.

More
01 Jun 2012 13:05 #20562 by jd896
hi i cannot seem to get emc to find my sub routines i have made a folder in the machines config folder and have added the line

SUBROUTINE_PATH = /home/profiler/linuxcnc/configs/ESAB_ULTRAREX_UXD-P_2000/subroutines

to my ini file before the program prefix line i just get unable to open file

any clues?

Please Log in or Create an account to join the conversation.

More
01 Jun 2012 17:07 #20577 by BigJohnT
Did you add that in the [RS274NGC] Section of your ini file? Note that typos are ignored in the ini file...

linuxcnc.org/docview/html/config/ini_con...b_rs274ngc_section_a

John

Please Log in or Create an account to join the conversation.

More
02 Jun 2012 19:26 #20617 by jd896
No I'll move that line to there

Is there anybody around the Sheffield england area willing to give some Paid help
I need to get this finished and running as we've lost some jobs now due to it being out of action just tuning and checking of calibration, and generally working the kinks out

Please Log in or Create an account to join the conversation.

More
02 Jun 2012 19:57 #20618 by BigJohnT
You might also ask on the mailing list. One chap on the IRC is about 60 miles south of you.

John

Please Log in or Create an account to join the conversation.

More
06 Jun 2012 13:57 - 06 Jun 2012 13:59 #20679 by jd896
shot of the hal scope as requested on the irc

also thanks for the moving of the subroutines line spot on now torch comes down settles and then fires
Attachments:
Last edit: 06 Jun 2012 13:59 by jd896.

Please Log in or Create an account to join the conversation.

More
06 Jun 2012 18:28 #20685 by PCW
a little tweak of FF1 to center the ferror
during cruise is probably in order
(average looks about 1/4 of a division low during cruise)

After that, looks like some 'I' would pull in the slow ramps
of ferror during accel and deccel
(and get rid of the static ferror at the beginning)

Please Log in or Create an account to join the conversation.

More
07 Jun 2012 07:56 #20699 by jd896
Thanks pcw if found after some reading and testing that my drives don't respond around 0.15 etherside of zero would you think the inverse deadband comp should work?

Please Log in or Create an account to join the conversation.

More
11 Jun 2012 22:37 #20825 by jd896
i have tryed some i and every time i try usless im not trying small enough numbers it throws the whole ferror off constant and all so what would help i read in another post about ff3 maybe ill post another chart tommorrow when i get chance to get back of the machine the ferror is closer now tho

Please Log in or Create an account to join the conversation.

More
15 Oct 2012 15:24 #25340 by jd896
hi again everyone im having problems trying to link the input status of the mesa cards inputs to my pyvcp panel all i want is to show arc on and arc transfer if i try to link the d-in or d-out signals in my postgui.hal file i get the error that this is already linked and the same if i link direct to the mesa pins ie in the postgui file if i use hm2_5i20.0.gpio.034.in it will complain the same ive even tryed using the mesa input direct in the xml of the pyvcp panel but still it doesnt work

i know this will be something simple but i cannot bottom this

many thanks john

File Attachment:

File Name: linuxcnc.zip
File Size:267 KB
Attachments:

Please Log in or Create an account to join the conversation.

Moderators: cncbasher
Time to create page: 0.220 seconds
Powered by Kunena Forum