Automatic tool change

More
24 Oct 2014 17:19 #52352 by viski
Automatic tool change was created by viski
I have automatic tool chance on NC lathe PITTLER with 12 tool positions.

Every tool has it's own contact , TWS aushoben NO contact and motor CW and CCW rotate.

I need some reference for M6 Txx tool change procedure in classic ladder.

Step by step :

1. M6 Txx tool change is requested
2. Check curently tool loaded ; if not start tool change procedure
3. send pulse for TWS aushoben
4. If contact NO ON rotate tool turet CW or CCW
5. When tool requested in position stop rotate motor , send impuls to TWS abgesetz
6. if NC ON , tool change procedure finished.

Please Log in or Create an account to join the conversation.

More
24 Oct 2014 17:54 #52354 by cncbasher
Replied by cncbasher on topic Automatic tool change
see page at :

gnipsel.com/linuxcnc/ladder/index.html

and the cl-ladder turret example .

is this a servo motor or just a dc motor ?
have you a picture of the toolchanger it will help if we need to make adjustment for any other movement or
input etc , such as grey encoder for position .

Please Log in or Create an account to join the conversation.

More
24 Oct 2014 18:19 #52355 by viski
Replied by viski on topic Automatic tool change
Photos link

bukovinskygroup.com/catalog/images/uhu-mb/CAM00117.jpg

bukovinskygroup.com/catalog/images/uhu-mb/CAM00118.jpg

TWS rotate 3 phase ac motor with gear reduction.

12 NO contacts for tools T1 - T12
1 NO contact for TWS aushoben
1 NC contact for TWS abgesetz
1 contactor for ac motor rotate CW
1 contactor for ac motor rotate CCW

Please Log in or Create an account to join the conversation.

Time to create page: 0.065 seconds
Powered by Kunena Forum