stepconf woes..

[ 0.185164] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12)
[ 0.185435] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 12) *5
[ 0.185711] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12) *5
[ 0.185986] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12)
[ 0.186213] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 0.186431] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 0.186650] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 0.186868] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[ 0.187193] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0, disabled.
[ 0.187459] ACPI: PCI Interrupt Link [ALKB] (IRQs *21), disabled.
[ 0.187725] ACPI: PCI Interrupt Link [ALKC] (IRQs *22), disabled.
[ 0.188044] ACPI: PCI Interrupt Link [ALKD] (IRQs *23), disabled.
[ 0.188182] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.188187] vgaarb: loaded
[ 0.188380] SCSI subsystem initialized
[ 0.188460] libata version 3.00 loaded.
[ 0.188563] usbcore: registered new interface driver usbfs
[ 0.188583] usbcore: registered new interface driver hub
[ 0.188623] usbcore: registered new device driver usb
[ 0.188812] ACPI: WMI: Mapper loaded
[ 0.188816] PCI: Using ACPI for IRQ routing
[ 0.189003] NetLabel: Initializing
[ 0.189007] NetLabel: domain hash size = 128
[ 0.189009] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.189028] NetLabel: unlabeled traffic allowed by default
[ 0.189071] Switching to clocksource tsc
[ 0.191763] AppArmor: AppArmor Filesystem Enabled
[ 0.191779] pnp: PnP ACPI init
[ 0.191797] ACPI: bus type pnp registered
[ 0.197030] pnp: PnP ACPI: found 15 devices
[ 0.197034] ACPI: ACPI bus type pnp unregistered
[ 0.197041] PnPBIOS: Disabled by ACPI PNP
[ 0.197058] system 00:00: iomem range 0xcd000-0xcffff has been reserved
[ 0.197063] system 00:00: iomem range 0xf0000-0xf7fff could not be reserved
[ 0.197067] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.197071] system 00:00: iomem range 0xfc000-0xfffff could not be reserved
[ 0.197076] system 00:00: iomem range 0x1fff0000-0x1fffffff could not be reserved
[ 0.197080] system 00:00: iomem range 0xffff0000-0xffffffff has been reserved
[ 0.197084] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.197088] system 00:00: iomem range 0x100000-0x1ffeffff could not be reserved
[ 0.197093] system 00:00: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.197097] system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.197101] system 00:00: iomem range 0xfff80000-0xfffeffff has been reserved
[ 0.197111] system 00:02: ioport range 0x400-0x47f has been reserved
[ 0.197115] system 00:02: ioport range 0x500-0x50f has been reserved
[ 0.197123] system 00:03: ioport range 0x4d0-0x4d1 has been reserved
[ 0.197127] system 00:03: ioport range 0x800-0x805 has been reserved
[ 0.197131] system 00:03: ioport range 0x290-0x297 has been reserved
[ 0.231921] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.231927] pci 0000:00:01.0: IO window: 0xa000-0xafff
[ 0.231934] pci 0000:00:01.0: MEM window: 0xea000000-0xea0fffff
[ 0.231940] pci 0000:00:01.0: PREFETCH window: 0xe0000000-0xe7ffffff
[ 0.231963] pci 0000:00:01.0: setting latency timer to 64
[ 0.231970] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.231974] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.231978] pci_bus 0000:01: resource 0 io: [0xa000-0xafff]
[ 0.231982] pci_bus 0000:01: resource 1 mem: [0xea000000-0xea0fffff]
[ 0.231985] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xe7ffffff]
[ 0.232034] NET: Registered protocol family 2
[ 0.232164] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.232590] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.232696] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.232798] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.232802] TCP reno registered
[ 0.232895] NET: Registered protocol family 1
[ 0.232921] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
[ 0.232986] pci 0000:01:00.0: Boot video device
[ 0.233250] Scanning for low memory corruption every 60 seconds
[ 0.233366] audit: initializing netlink socket (disabled)
[ 0.233382] type=2000 audit(1308079590.230:1): initialized
[ 0.241655] Trying to unpack rootfs image as initramfs...
[ 0.251109] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.258929] VFS: Disk quotas dquot_6.5.2
[ 0.259032] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.259849] fuse init (API version 7.13)
[ 0.259970] msgmni has been set to 968
[ 0.260262] alg: No test for stdrng (krng)
[ 0.260346] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.260351] io scheduler noop registered
[ 0.260354] io scheduler anticipatory registered
[ 0.260357] io scheduler deadline registered
[ 0.260413] io scheduler cfq registered (default)
[ 0.260575] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.260612] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.260714] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.260721] ACPI: Power Button [PWRB]
[ 0.260785] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.260795] ACPI: Sleep Button [SLPB]
[ 0.260885] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.260889] ACPI: Power Button [PWRF]
[ 0.263015] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.263127] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.263231] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.263658] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.263815] 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 0.265280] brd: module loaded
[ 0.265923] loop: module loaded
[ 0.266044] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 0.266436] ACPI: PCI Interrupt Link [ALKA] disabled and referenced, BIOS bug
[ 0.266622] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
[ 0.266626] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
[ 0.266634] alloc irq_desc for 20 on node -1
[ 0.266637] alloc kstat_irqs on node -1
[ 0.266649] pata_acpi 0000:00:11.1: PCI INT A -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20
[ 0.266725] pata_acpi 0000:00:11.1: PCI INT A disabled
[ 0.271357] isapnp: Scanning for PnP cards...
[ 0.277215] Fixed MDIO Bus: probed
[ 0.277270] PPP generic driver version 2.4.2
[ 0.277347] tun: Universal TUN/TAP device driver, 1.6
[ 0.277351] tun: (C) 1999-2004 Max Krasnyansky <This email address is being protected from spambots. You need JavaScript enabled to view it.>
[ 0.277482] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.277514] alloc irq_desc for 16 on node -1
[ 0.277517] alloc kstat_irqs on node -1
[ 0.277526] ehci_hcd 0000:00:0b.2: PCI INT C -> GSI 16 (level, low) -> IRQ 16
[ 0.277549] ehci_hcd 0000:00:0b.2: EHCI Host Controller
[ 0.277597] ehci_hcd 0000:00:0b.2: new USB bus registered, assigned bus number 1
[ 0.277684] ehci_hcd 0000:00:0b.2: irq 16, io mem 0xea100000
[ 0.326661] ehci_hcd 0000:00:0b.2: USB 2.0 started, EHCI 1.00
[ 0.326828] usb usb1: configuration #1 chosen from 1 choice
[ 0.326877] hub 1-0:1.0: USB hub found
[ 0.326905] hub 1-0:1.0: 4 ports detected
[ 0.326983] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.327006] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.327068] alloc irq_desc for 18 on node -1
[ 0.327073] alloc kstat_irqs on node -1
[ 0.327081] uhci_hcd 0000:00:0b.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.327093] uhci_hcd 0000:00:0b.0: UHCI Host Controller
[ 0.327140] uhci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
[ 0.327194] uhci_hcd 0000:00:0b.0: irq 18, io base 0x0000d000
[ 0.327315] usb usb2: configuration #1 chosen from 1 choice
[ 0.327356] hub 2-0:1.0: USB hub found
[ 0.327369] hub 2-0:1.0: 2 ports detected
[ 0.327428] alloc irq_desc for 19 on node -1
[ 0.327432] alloc kstat_irqs on node -1
[ 0.327438] uhci_hcd 0000:00:0b.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.327450] uhci_hcd 0000:00:0b.1: UHCI Host Controller
[ 0.327504] uhci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 3
[ 0.327554] uhci_hcd 0000:00:0b.1: irq 19, io base 0x0000d400
[ 0.327682] usb usb3: configuration #1 chosen from 1 choice
[ 0.327723] hub 3-0:1.0: USB hub found
[ 0.327736] hub 3-0:1.0: 2 ports detected
[ 0.327873] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.328398] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.328409] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.328598] mice: PS/2 mouse device common for all mice
[ 0.328796] rtc_cmos 00:05: RTC can wake from S4
[ 0.328854] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.328907] rtc0: alarms up to one year, y3k, 242 bytes nvram
[ 0.329054] device-mapper: uevent: version 1.0.3
[ 0.331118] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: This email address is being protected from spambots. You need JavaScript enabled to view it.
[ 0.332745] device-mapper: multipath: version 1.1.0 loaded
[ 0.332751] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.333768] EISA: Probing bus 0 at eisa.0
[ 0.333811] EISA: Detected 0 cards.
[ 0.333815] cpuidle: using governor ladder
[ 0.333819] cpuidle: using governor menu
[ 0.334396] TCP cubic registered
[ 0.334572] NET: Registered protocol family 10
[ 0.335190] lo: Disabled Privacy Extensions
[ 0.335595] NET: Registered protocol family 17
[ 0.335638] Using IPI No-Shortcut mode
[ 0.335772] registered taskstats version 1
[ 0.336111] rtc_cmos 00:05: setting system clock to 2011-06-14 19:26:31 UTC (1308079591)
[ 0.336116] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.336118] EDD information not available.
[ 0.347871] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 0.766418] usb 1-3: new high speed USB device using ehci_hcd and address 3
[ 0.942970] isapnp: No Plug & Play device found
[ 0.976907] usb 1-3: configuration #1 chosen from 1 choice
[ 1.037736] Freeing initrd memory: 12800k freed
[ 1.054245] Freeing unused kernel memory: 620k freed
[ 1.055057] Write protecting the kernel text: 4540k
[ 1.055083] Write protecting the kernel read-only data: 1668k
[ 1.084811] udev: starting version 151
[ 1.232058] usb 2-2: new low speed USB device using uhci_hcd and address 2
[ 1.361305] pata_via 0000:00:11.1: version 0.3.4
[ 1.361331] pata_via 0000:00:11.1: PCI INT A -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20
[ 1.361606] Linux agpgart interface v0.103
[ 1.364983] scsi0 : pata_via
[ 1.365234] scsi1 : pata_via
[ 1.370506] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe400 irq 14
[ 1.370511] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe408 irq 15
[ 1.370744] agpgart: Detected VIA PM800/PN800/PM880/PN880 chipset
[ 1.373948] agpgart-via 0000:00:00.0: AGP aperture is 32M @ 0xe8000000
[ 1.406370] usb 2-2: configuration #1 chosen from 1 choice
[ 1.488093] [drm] Initialized drm 1.1.0 20060810
[ 1.588651] ata1.00: ATA-6: ST3200822A, 3.01, max UDMA/100
[ 1.588657] ata1.00: 390721968 sectors, multi 16: LBA48
[ 1.604511] ata1.00: configured for UDMA/100
[ 1.604692] scsi 0:0:0:0: Direct-Access ATA ST3200822A 3.01 PQ: 0 ANSI: 5
[ 1.604932] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.605395] sd 0:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB)
[ 1.605478] sd 0:0:0:0: [sda] Write Protect is off
[ 1.605483] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.605526] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.605754] sda: sda1 sda2 < sda5 >
[ 1.647655] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.768435] ata2.00: ATAPI: LITE-ON CD-RW SOHR-5238S, 4S04, max UDMA/33
[ 1.784314] ata2.00: configured for UDMA/33
[ 1.785676] scsi 1:0:0:0: CD-ROM LITE-ON CD-RW SOHR-5238S 4S04 PQ: 0 ANSI: 5
[ 1.789420] sr0: scsi3-mmc drive: 31x/52x writer cd/rw xa/form2 cdda tray
[ 1.789425] Uniform CD-ROM driver Revision: 3.20
[ 1.789575] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.789667] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.809001] usbcore: registered new interface driver hiddev
[ 1.834942] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:0b.0/usb2/2-2/2-2:1.0/input/input5
[ 1.835096] generic-usb 0003:413C:2003.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:0b.0-2/input0
[ 1.835134] usbcore: registered new interface driver usbhid
[ 1.835139] usbhid: v2.6:USB HID core driver
[ 1.863951] [drm] radeon defaulting to kernel modesetting.
[ 1.863958] [drm] radeon kernel modesetting enabled.
[ 1.864069] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.869157] [drm] radeon: Initializing kernel modesetting.
[ 1.869265] [drm] register mmio base: 0xEA020000
[ 1.869269] [drm] register mmio size: 65536
[ 1.869564] [drm] GPU reset succeed (RBBM_STATUS=0x00000140)
[ 1.869589] agpgart-via 0000:00:00.0: AGP 3.5 bridge
[ 1.869610] agpgart-via 0000:00:00.0: bridge is in legacy mode, falling back to 2.x
[ 1.869621] agpgart-via 0000:00:00.0: putting AGP V2 device into 4x mode
[ 1.869698] radeon 0000:01:00.0: putting AGP V2 device into 4x mode
[ 1.869704] [drm] radeon: VRAM 64M
[ 1.869707] [drm] radeon: VRAM from 0x00000000 to 0x03FFFFFF
[ 1.869710] [drm] radeon: GTT 32M
[ 1.869712] [drm] radeon: GTT from 0xE8000000 to 0xE9FFFFFF
[ 1.869736] [drm] radeon: irq initialized.
[ 1.869967] [drm] Detected VRAM RAM=64M, BAR=128M
[ 1.869974] [drm] RAM width 64bits DDR
[ 1.870228] [TTM] Zone kernel: Available graphics memory: 254616 kiB.
[ 1.870255] [drm] radeon: 64M of VRAM memory ready
[ 1.870259] [drm] radeon: 32M of GTT memory ready.
[ 1.880435] [drm] radeon: cp idle (0x00008080)
[ 1.880484] [drm] Loading R100 Microcode
[ 1.880755] platform radeon_cp.0: firmware: requesting radeon/R100_cp.bin
[ 1.890783] [drm] radeon: ring at 0x00000000E8000000
[ 1.890806] [drm] ring test succeeded in 1 usecs
[ 1.896128] [drm] radeon: ib pool ready.
[ 1.896238] [drm] ib test succeeded in 0 usecs
[ 1.896608] [drm] DFP table revision: 2
[ 1.896857] [drm] Default TV standard: NTSC
[ 1.896861] [drm] 27.000000000 MHz TV ref clk
[ 1.896864] [drm] No TV DAC info found in BIOS
[ 1.896869] [drm] Default TV standard: NTSC
[ 1.896871] [drm] 27.000000000 MHz TV ref clk
[ 1.896947] [drm] Radeon Display Connectors
[ 1.896950] [drm] Connector 0:
[ 1.896953] [drm] VGA
[ 1.896957] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 1.896959] [drm] Encoders:
[ 1.896962] [drm] CRT1: INTERNAL_DAC1
[ 1.896965] [drm] Connector 1:
[ 1.896967] [drm] DVI-D
[ 1.896969] [drm] HPD1
[ 1.896972] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 1.896974] [drm] Encoders:
[ 1.896977] [drm] DFP1: INTERNAL_TMDS1
[ 1.896979] [drm] Connector 2:
[ 1.896982] [drm] S-video
[ 1.896984] [drm] Encoders:
[ 1.896986] [drm] TV1: INTERNAL_DAC2
[ 2.036473] [drm] fb mappable at 0xE0040000
[ 2.036478] [drm] vram apper at 0xE0000000
[ 2.036481] [drm] size 3145728
[ 2.036483] [drm] fb depth is 24
[ 2.036486] [drm] pitch is 4096
[ 2.036661] fb0: radeondrmfb frame buffer device
[ 2.036665] registered panic notifier
[ 2.036674] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0
[ 2.039883] vga16fb: initializing
[ 2.039891] vga16fb: mapped to 0xc00a0000
[ 2.039897] vga16fb: not registering due to another framebuffer present
[ 2.222432] Console: switching to colour frame buffer device 128x48
[ 2.692093] xor: automatically using best checksumming function: pIII_sse
[ 2.712010] pIII_sse : 4512.000 MB/sec
[ 2.712014] xor: using function: pIII_sse (4512.000 MB/sec)
[ 2.732856] device-mapper: dm-raid45: initialized v0.2594b
[ 2.885677] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 9.719260] Adding 1490936k swap on /dev/sda5. Priority:-1 extents:1 across:1490936k
[ 9.765873] udev: starting version 151
[ 10.058991] lp: driver loaded but no devices found
[ 10.094544] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 10.162937] parport_pc 00:0a: reported by Plug and Play ACPI
[ 10.163003] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 10.334968] lp0: using parport0 (interrupt-driven).
[ 10.500597] irda_init()
[ 10.500621] NET: Registered protocol family 23
[ 10.560884] parport_serial 0000:00:09.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 10.560915] parport1: PC-style at 0xb800 [PCSPP,TRISTATE,EPP]
[ 10.576439] ppdev: user-space parallel port driver
[ 10.602916] usbcore: registered new interface driver cdc_ether
[ 10.605349] gameport: NS558 PnP Gameport is pnp00:0e/gameport0, io 0x201, speed 764kHz
[ 10.644442] lp1: using parport1 (polling).
[ 10.644666] 0000:00:09.0: ttyS2 at I/O 0xb000 (irq = 16) is a 16550A
[ 10.644876] 0000:00:09.0: ttyS3 at I/O 0xb400 (irq = 16) is a 16550A
[ 10.659616] usb0: register 'rndis_host' at usb-0000:00:0b.2-3, RNDIS device, c6:b8:47:a2:84:aa
[ 10.659662] usbcore: registered new interface driver rndis_host
[ 10.719823] psmouse serio1: ID: 10 00 64
[ 10.754167] cfg80211: Calling CRDA to update world regulatory domain
[ 10.782116] gameport: EMU10K1 is pci0000:00:0a.1/gameport0, io 0xcc00, speed 962kHz
[ 10.789218] usbcore: registered new interface driver rndis_wlan
[ 10.927291] cfg80211: World regulatory domain updated:
[ 10.927298] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 10.927303] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.927307] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 10.927311] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 10.927315] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.927318] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.969411] type=1505 audit(1308079602.131:2): operation="profile_load" pid=623 name="/sbin/dhclient3"
[ 10.970161] type=1505 audit(1308079602.131:3): operation="profile_load" pid=623 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 10.970560] type=1505 audit(1308079602.131:4): operation="profile_load" pid=623 name="/usr/lib/connman/scripts/dhclient-script"
[ 11.188755] alloc irq_desc for 17 on node -1
[ 11.188761] alloc kstat_irqs on node -1
[ 11.188773] EMU10K1_Audigy 0000:00:0a.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 11.301093] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input6
[ 11.702487] type=1505 audit(1308079602.863:5): operation="profile_load" pid=839 name="/usr/share/gdm/guest-session/Xsession"
[ 11.711161] type=1505 audit(1308079602.871:6): operation="profile_replace" pid=841 name="/sbin/dhclient3"
[ 11.711904] type=1505 audit(1308079602.871:7): operation="profile_replace" pid=841 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 11.735846] type=1505 audit(1308079602.895:8): operation="profile_replace" pid=841 name="/usr/lib/connman/scripts/dhclient-script"
Usage: grep [OPTION]... PATTERN [FILE]...
Try `grep --help' for more information.
[ 11.762307] type=1505 audit(1308079602.923:9): operation="profile_load" pid=847 name="/usr/bin/evince"
[ 11.785946] type=1505 audit(1308079602.947:10): operation="profile_load" pid=847 name="/usr/bin/evince-previewer"
[ 11.792427] type=1505 audit(1308079602.955:11): operation="profile_load" pid=847 name="/usr/bin/evince-thumbnailer"
[ 22.464016] usb0: no IPv6 routers present
[ 62.965976] I-pipe: Domain RTAI registered.
[ 62.965988] RTAI[hal]: <3.8.1> mounted over IPIPE-NOTHREADS 2.6-03.
[ 62.965991] RTAI[hal]: compiled with gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) .
[ 62.966000] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0).
[ 62.966003] PIPELINE layers:
[ 62.966008] e14b1e20 9ac15d93 RTAI 200
[ 62.966011] c085cb20 0 Linux 100
[ 63.002594] RTAI[malloc]: global heap size = 2097152 bytes, <BSD>.
[ 63.002760] RTAI[sched]: IMMEDIATE, MP, USER/KERNEL SPACE: <with RTAI OWN KTASKs>, kstacks pool size = 524288 bytes.
[ 63.002767] RTAI[sched]: hard timer type/freq = APIC/8299581(Hz); default timing: periodic; linear timed lists.
[ 63.002772] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 2788597000 hz.
[ 63.002776] RTAI[sched]: timer setup = 999 ns, resched latency = 2944 ns.
[ 63.002913] RTAI[usi]: enabled.
[ 63.128609] RTAI[math]: loaded.
[ 63.312608] PARPORT: linux parport parport0 does not support mode 4.
[ 63.312612] PARPORT: continuing anyway.
[ 64.174081] Failed to communicate with pluto-servo board after programming firmware.
[ 64.852289] RTAI[math]: unloaded.
[ 64.927819] SCHED releases registered named ALIEN RTGLBH
[ 64.941129] RTAI[malloc]: unloaded.
[ 65.040020] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0).
[ 65.045745] I-pipe: Domain RTAI unregistered.
[ 65.045759] RTAI[hal]: unmounted.
[ 138.931287] I-pipe: Domain RTAI registered.
[ 138.931299] RTAI[hal]: <3.8.1> mounted over IPIPE-NOTHREADS 2.6-03.
[ 138.931302] RTAI[hal]: compiled with gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) .
[ 138.931311] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0).
[ 138.931314] PIPELINE layers:
[ 138.931318] e14b1e20 9ac15d93 RTAI 200
[ 138.931322] c085cb20 0 Linux 100
[ 138.967884] RTAI[malloc]: global heap size = 2097152 bytes, <BSD>.
[ 138.968184] RTAI[sched]: IMMEDIATE, MP, USER/KERNEL SPACE: <with RTAI OWN KTASKs>, kstacks pool size = 524288 bytes.
[ 138.968191] RTAI[sched]: hard timer type/freq = APIC/8299581(Hz); default timing: periodic; linear timed lists.
[ 138.968196] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 2788597000 hz.
[ 138.968199] RTAI[sched]: timer setup = 999 ns, resched latency = 2944 ns.
[ 138.968345] RTAI[usi]: enabled.
[ 139.074494] RTAI[math]: loaded.
[ 139.234565] config string '0x0378'
[ 946.763047] RTAI[math]: unloaded.
[ 946.842580] SCHED releases registered named ALIEN RTGLBH
[ 946.857351] RTAI[malloc]: unloaded.
[ 946.956024] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0).
[ 946.962630] I-pipe: Domain RTAI unregistered.
[ 946.962644] RTAI[hal]: unmounted.
[ 1638.074975] I-pipe: Domain RTAI registered.
[ 1638.074988] RTAI[hal]: <3.8.1> mounted over IPIPE-NOTHREADS 2.6-03.
[ 1638.074992] RTAI[hal]: compiled with gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) .
[ 1638.075000] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0).
[ 1638.075004] PIPELINE layers:
[ 1638.075008] e14b1e20 9ac15d93 RTAI 200
[ 1638.075012] c085cb20 0 Linux 100
[ 1638.108983] RTAI[malloc]: global heap size = 2097152 bytes, <BSD>.
[ 1638.109144] RTAI[sched]: IMMEDIATE, MP, USER/KERNEL SPACE: <with RTAI OWN KTASKs>, kstacks pool size = 524288 bytes.
[ 1638.109152] RTAI[sched]: hard timer type/freq = APIC/8299581(Hz); default timing: periodic; linear timed lists.
[ 1638.109157] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 2788597000 hz.
[ 1638.109161] RTAI[sched]: timer setup = 999 ns, resched latency = 2944 ns.
[ 1638.109300] RTAI[usi]: enabled.
[ 1638.217177] RTAI[math]: loaded.
[ 1638.323193] config string '0x0378'
[ 1682.985875] RTAI[math]: unloaded.
[ 1683.063351] SCHED releases registered named ALIEN RTGLBH
[ 1683.077135] RTAI[malloc]: unloaded.
[ 1683.176020] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0).
[ 1683.181757] I-pipe: Domain RTAI unregistered.
[ 1683.181771] RTAI[hal]: unmounted.
[ 1780.810161] I-pipe: Domain RTAI registered.
[ 1780.810173] RTAI[hal]: <3.8.1> mounted over IPIPE-NOTHREADS 2.6-03.
[ 1780.810177] RTAI[hal]: compiled with gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) .
[ 1780.810186] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0).
[ 1780.810189] PIPELINE layers:
[ 1780.810193] e14b1e20 9ac15d93 RTAI 200
[ 1780.810197] c085cb20 0 Linux 100
[ 1780.843255] RTAI[malloc]: global heap size = 2097152 bytes, <BSD>.
[ 1780.843419] RTAI[sched]: IMMEDIATE, MP, USER/KERNEL SPACE: <with RTAI OWN KTASKs>, kstacks pool size = 524288 bytes.
[ 1780.843427] RTAI[sched]: hard timer type/freq = APIC/8299581(Hz); default timing: periodic; linear timed lists.
[ 1780.843432] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 2788597000 hz.
[ 1780.843435] RTAI[sched]: timer setup = 999 ns, resched latency = 2944 ns.
[ 1780.843587] RTAI[usi]: enabled.
[ 1780.953519] RTAI[math]: loaded.
[ 1781.056815] config string '0x0378'
[ 1854.310118] RTAI[math]: unloaded.
[ 1854.392651] SCHED releases registered named ALIEN RTGLBH
[ 1854.409142] RTAI[malloc]: unloaded.
[ 1854.508020] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0).
[ 1854.514666] I-pipe: Domain RTAI unregistered.
[ 1854.514679] RTAI[hal]: unmounted.
[ 3693.270642] I-pipe: Domain RTAI registered.
[ 3693.270655] RTAI[hal]: <3.8.1> mounted over IPIPE-NOTHREADS 2.6-03.
[ 3693.270658] RTAI[hal]: compiled with gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) .
[ 3693.270667] RTAI[hal]: mounted (IPIPE-NOTHREADS, IMMEDIATE (INTERNAL IRQs DISPATCHED), ISOL_CPUS_MASK: 0).
[ 3693.270670] PIPELINE layers:
[ 3693.270675] e14b1e20 9ac15d93 RTAI 200
[ 3693.270678] c085cb20 0 Linux 100
[ 3693.303644] RTAI[malloc]: global heap size = 2097152 bytes, <BSD>.
[ 3693.303812] RTAI[sched]: IMMEDIATE, MP, USER/KERNEL SPACE: <with RTAI OWN KTASKs>, kstacks pool size = 524288 bytes.
[ 3693.303820] RTAI[sched]: hard timer type/freq = APIC/8299581(Hz); default timing: periodic; linear timed lists.
[ 3693.303825] RTAI[sched]: Linux timer freq = 250 (Hz), TimeBase freq = 2788597000 hz.
[ 3693.303828] RTAI[sched]: timer setup = 999 ns, resched latency = 2944 ns.
[ 3693.303991] RTAI[usi]: enabled.
[ 3693.423219] RTAI[math]: loaded.
[ 3693.535780] config string '0x0378'
[ 3730.650242] RTAI[math]: unloaded.
[ 3730.727613] SCHED releases registered named ALIEN RTGLBH
[ 3730.741153] RTAI[malloc]: unloaded.
[ 3730.840019] RTAI[sched]: unloaded (forced hard/soft/hard transitions: traps 0, syscalls 0).
[ 3730.845977] I-pipe: Domain RTAI unregistered.
[ 3730.845991] RTAI[hal]: unmounted.
submicro@submicro-desktop:~$

submicro@submicro-desktop:~$ halrun -U
submicro@submicro-desktop:~$ lspci -vv
00:00.0 Host bridge: VIA Technologies, Inc. CN333/CN400/PM880 Host Bridge
Subsystem: VIA Technologies, Inc. CN333/CN400/PM880 Host Bridge
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 8
Region 0: Memory at e8000000 (32-bit, prefetchable) [size=32M]
Capabilities: <access denied>
Kernel driver in use: agpgart-via
Kernel modules: via-agp

00:00.1 Host bridge: VIA Technologies, Inc. CN333/CN400/PM880 Host Bridge
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

00:00.2 Host bridge: VIA Technologies, Inc. CN333/CN400/PM880 CPU Host Bridge
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

00:00.3 Host bridge: VIA Technologies, Inc. CN333/CN400/PM880 Host Bridge
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

00:00.4 Host bridge: VIA Technologies, Inc. CN333/CN400/PM880 Host Bridge
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

00:00.7 Host bridge: VIA Technologies, Inc. CN333/CN400/PM880 Host Bridge
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

00:01.0 PCI bridge: VIA Technologies, Inc. VT8237/VX700 PCI Bridge
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: ea000000-ea0fffff
Prefetchable memory behind bridge: e0000000-e7ffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel modules: shpchp

00:09.0 Communication controller: NetMos Technology PCI 9835 Multi-I/O Controller (rev 01)
Subsystem: LSI Logic / Symbios Logic Device 0012
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at b000
Region 1: I/O ports at b400
Region 2: I/O ports at b800
Region 3: I/O ports at bc00
Region 4: I/O ports at c000
Region 5: I/O ports at c400
Kernel driver in use: parport_serial
Kernel modules: parport_serial

00:0a.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 05)
Subsystem: Creative Labs Device 8023
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 5000ns max)
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at c800
Capabilities: <access denied>
Kernel driver in use: EMU10K1_Audigy
Kernel modules: snd-emu10k1

00:0a.1 Input device controller: Creative Labs SB Live! Game Port (rev 05)
Subsystem: Creative Labs Device 0020
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Region 0: I/O ports at cc00
Capabilities: <access denied>
Kernel driver in use: Emu10k1_gameport
Kernel modules: emu10k1-gp

00:0b.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 61)
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 4: I/O ports at d000
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:0b.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 61)
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at d400
Capabilities: <access denied>
Kernel driver in use: uhci_hcd

00:0b.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 63) (prog-if 20)
Subsystem: VIA Technologies, Inc. USB 2.0
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 128 bytes
Interrupt: pin C routed to IRQ 16
Region 0: Memory at ea100000 (32-bit, non-prefetchable)
Capabilities: <access denied>
Kernel driver in use: ehci_hcd

00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
Subsystem: VIA Technologies, Inc. VT8235 ISA Bridge
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: i2c-viapro, via-ircc

00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 20
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
Region 4: I/O ports at e400
Capabilities: <access denied>
Kernel driver in use: pata_via
Kernel modules: pata_via

01:00.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE]
Subsystem: ATI Technologies Inc Device 053a
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at a000
Region 2: Memory at ea020000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at ea000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
Kernel modules: radeonfb, radeon

submicro@submicro-desktop:~$