NEWS
LinuxCNC 2.5.2 Release
LinuxCNC 2.5.2 Update Released (changelog).
 
LinuxCNC 2.5.1 Release

LinuxCNC 2.5.1 Update Released (changelog). If the Package Manager does not prompt you to upgrade see this page.
 
LinuxCNC 2.5.0 Release
New major release (changelog). See the instructions to update your system from EMC 2.4 to LinuxCNC 2.5.
 
Home Forum Configuring LinuxCNC StepConf Wizard Need Help

Welcome, Guest
Username: Password: Remember me
Forgot your password? Forgot your username?
Forum Header

TOPIC: Need Help

Re:Need Help 10 Jul 2012 09:49 #21754

  • ricky_a
  • ricky_a's Avatar
  • OFFLINE
  • Senior Boarder
  • Posts: 63
  • Karma: 0
thanks now it works, but I still have problems with distance. in stepconf wizard I got it to fit with distance, for example, 10mm. but when I run it in linuxcnc distances are only 5mm
The administrator has disabled public write access.

Re:Need Help 10 Jul 2012 09:52 #21756

  • andypugh
  • andypugh's Avatar
  • OFFLINE
  • Moderator
  • Posts: 4146
  • Thank you received: 141
  • Karma: 130
ricky_a wrote:
thanks now it works, but I still have problems with distance. in stepconf wizard I got it to fit with distance, for example, 10mm. but when I run it in linuxcnc distances are only 5mm

Sounds like microstepping. Double the microstepping number in stepconf.
The administrator has disabled public write access.

Re:Need Help 12 Jul 2012 13:34 #21846

  • ricky_a
  • ricky_a's Avatar
  • OFFLINE
  • Senior Boarder
  • Posts: 63
  • Karma: 0
It worked thanks.

I bought a laptop with parelle port, but it reports this error
The administrator has disabled public write access.

Re:Need Help 12 Jul 2012 13:35 #21847

  • ricky_a
  • ricky_a's Avatar
  • OFFLINE
  • Senior Boarder
  • Posts: 63
  • Karma: 0
The administrator has disabled public write access.

Re:Need Help 13 Jul 2012 08:09 #21886

  • ricky_a
  • ricky_a's Avatar
  • OFFLINE
  • Senior Boarder
  • Posts: 63
  • Karma: 0
insmod: error inserting '/usr/realtime-2.6.32-122-rtai/modules/rtai_hal.ko': -1 Operation not permitted
The administrator has disabled public write access.

Re:Need Help 13 Jul 2012 08:14 #21890

  • andypugh
  • andypugh's Avatar
  • OFFLINE
  • Moderator
  • Posts: 4146
  • Thank you received: 141
  • Karma: 130
ricky_a wrote:
insmod: error inserting '/usr/realtime-2.6.32-122-rtai/modules/rtai_hal.ko': -1 Operation not permitted

Is this a LiveCD installation, or did you compile it?

You sometimes get this if realtime crashed previously. Might be worth restarting the PC and trying again.
The administrator has disabled public write access.
Time to create page: 0.745 seconds
Powered by Kunena Forum
© 2013 LinuxCNC.org
Joomla! is Free Software released under the GNU General Public License.