NEWS
LinuxCNC 2.5.2 Release
There are no translations available.

LinuxCNC 2.5.2 Update Released (changelog).
 
LinuxCNC 2.5.1 Release
There are no translations available.

LinuxCNC 2.5.1 Update Released (changelog). If the Package Manager does not prompt you to upgrade see this page.
 
LinuxCNC 2.5.0 Release
There are no translations available.

New major release (changelog). See the instructions to update your system from EMC 2.4 to LinuxCNC 2.5.
 
Home Forum Configuring LinuxCNC GladeVCP GladeVCP

Welcome, Guest
Username: Password: Remember me
Forgot your password? Forgot your username?

TOPIC: GladeVCP

GladeVCP 12 Mai 2011 05:11 #9743

  • BigJohnT
  • BigJohnT's Avatar
  • OFFLINE
  • Administrator
  • Posts: 5082
  • Thank you received: 102
  • Karma: 136
GladeVCP is an EMC2 component which adds the ability to add a virtual control panel to EMC user interfaces like Axis or Touchy. It is similar to PyVCP; whereas PyVCP panels are created by editing an XML file manually, GladeVCP uses the glade WYSIWYG user interface editor. Therefore, it’s faster and easier to create visually pleasing panels with GladeVCP.

You will need the upcoming 2.5 release to use GladeVCP or use one of the upgrade options to get 2.5 before the release.

buildbot.linuxcnc.org/
or
wiki.linuxcnc.org/cgi-bin/emcinfo.pl?Git

On line docs are here

John
The administrator has disabled public write access.

Re:GladeVCP 12 Mai 2011 05:59 #9751

  • Mike_Eitel
  • Mike_Eitel's Avatar
  • OFFLINE
  • Expert Boarder
  • Posts: 136
  • Thank you received: 2
  • Karma: 2
For my new installtion I'm waiting for 2.5,
Do you have a guess when it will be published.

Another question
I saw that in the documentation of the future version it seemed to be based on 2.6

Can I use the doc also for glade version 2.5 ?
Last Edit: 12 Mai 2011 06:05 by Mike_Eitel. Reason: Asking doc question
The administrator has disabled public write access.

Re:GladeVCP 12 Mai 2011 06:05 #9754

  • BigJohnT
  • BigJohnT's Avatar
  • OFFLINE
  • Administrator
  • Posts: 5082
  • Thank you received: 102
  • Karma: 136
No clue, sorry.

John
The administrator has disabled public write access.

Re:GladeVCP 12 Mai 2011 06:06 #9755

  • Mike_Eitel
  • Mike_Eitel's Avatar
  • OFFLINE
  • Expert Boarder
  • Posts: 136
  • Thank you received: 2
  • Karma: 2
I wss too slow in edit :-)

Here again:

Another question
I saw that in the documentation of the future version it seemed to be based on 2.6

Can I use the doc also for glade version 2.5 ?
The administrator has disabled public write access.

Re:GladeVCP 12 Mai 2011 06:08 #9756

  • BigJohnT
  • BigJohnT's Avatar
  • OFFLINE
  • Administrator
  • Posts: 5082
  • Thank you received: 102
  • Karma: 136
Yea, that link automagiclly shows the master version as soon as a branch is created. The 2.5 branch was created some time ago.

John
The administrator has disabled public write access.

Re:GladeVCP 12 Mai 2011 06:10 #9758

  • Mike_Eitel
  • Mike_Eitel's Avatar
  • OFFLINE
  • Expert Boarder
  • Posts: 136
  • Thank you received: 2
  • Karma: 2
thx..
As Glade becomes streamline I will go and "digg into"
Mike
The administrator has disabled public write access.

Re:GladeVCP 12 Mai 2011 13:36 #9773

  • PKM
  • PKM's Avatar
  • OFFLINE
  • Senior Boarder
  • Posts: 54
  • Thank you received: 1
  • Karma: 4
Great tool, but I can't install it on 10.04

Git pull for 2.5branch, then compiled simulator with no errors.

$ sudo apt-get install python-gnome2 python-glade2 python-numpy python-numpy python-imaging python-xlib python-gtkglext1 python-configobj gtksourceview2
says "Couldn't find package gtksourceview2", others I had installed.

$sudo apt-get install glade is successful.

$ cd emc2-dev/lib/python/gladevcp
$ gladevcp gladevcp-test.ui

results in gladevcp: command not found
The administrator has disabled public write access.

Re:GladeVCP 13 Mai 2011 08:45 #9781

  • psha
  • psha's Avatar
  • OFFLINE
  • Moderator
  • Posts: 107
  • Karma: 22
There is typo in instruction. May you point where you've found this package list?
Package name is 'python-gtksourceview2'
The administrator has disabled public write access.

Re:GladeVCP 13 Mai 2011 10:09 #9784

  • PKM
  • PKM's Avatar
  • OFFLINE
  • Senior Boarder
  • Posts: 54
  • Thank you received: 1
  • Karma: 4
I followed this manual wiki.linuxcnc.org/emcinfo.pl?GladeVcpSetup

Thanks, but I proved to have this package already. So it's the same - not working.

Is GladeVCP supposed to work on simulator?
The administrator has disabled public write access.

Re:GladeVCP 13 Mai 2011 10:12 #9785

  • psha
  • psha's Avatar
  • OFFLINE
  • Moderator
  • Posts: 107
  • Karma: 22
Sure.
But you won't find it in lib/python/gladevcp.
Run 'make' to build (really, just move) gladevcp script to bin/ subdir and compile needed C extensions.
Then source scripts/emc-environment just like for any other operations in Run-in-place mode.
The administrator has disabled public write access.
Moderators: mhaberler
Time to create page: 1.108 seconds
Powered by Kunena Forum
© 2013 LinuxCNC.org
Joomla! is Free Software released under the GNU General Public License.