NEWS
LinuxCNC 2.5.2 Release
There are no translations available.

LinuxCNC 2.5.2 Update Released (changelog).
 
LinuxCNC 2.5.1 Release
There are no translations available.

LinuxCNC 2.5.1 Update Released (changelog). If the Package Manager does not prompt you to upgrade see this page.
 
LinuxCNC 2.5.0 Release
There are no translations available.

New major release (changelog). See the instructions to update your system from EMC 2.4 to LinuxCNC 2.5.
 
Home Forum Hardware & Machines Driver Boards For sale: Pico systems PPMC system

Welcome, Guest
Username: Password: Remember me
Forgot your password? Forgot your username?
  • Page:
  • 1

TOPIC: For sale: Pico systems PPMC system

For sale: Pico systems PPMC system 04 Jul 2012 12:25 #21568

  • steve10778
  • steve10778's Avatar
  • OFFLINE
  • Fresh Boarder
  • Posts: 17
  • Karma: 0
Hey guys,
i am selling all of my stuff.
Pico systems ppmc cards and card cage, with ssrs and fuses on ebay.

See www.ebay.com/itm/251100700540?ssPageName...id=p3984.m1555.l2649

Thanks for all of your help a few years ago, and Jon Elson, especially. His personal support is great. I also was able to help another guy in ohio get a machine running too. I am no longer in the hobby business, i have a full blown machine shop and i need a manual bridgeport again, so i took everything off.

Best Regards,

Steve
The administrator has disabled public write access.

Re:For sale: Pico systems PPMC system 16 Jul 2012 20:57 #22053

  • jmelson
  • jmelson's Avatar
  • OFFLINE
  • Moderator
  • Posts: 279
  • Thank you received: 10
  • Karma: 32
steve10778 wrote:
Hey guys,
i am selling all of my stuff.
Pico systems ppmc cards and card cage, with ssrs and fuses on ebay.

See www.ebay.com/itm/251100700540?ssPageName...id=p3984.m1555.l2649

Thanks for all of your help a few years ago, and Jon Elson, especially. His personal support is great. I also was able to help another guy in ohio get a machine running too. I am no longer in the hobby business, i have a full blown machine shop and i need a manual bridgeport again, so i took everything off.

Best Regards,

Steve
You should be careful, the photo you are showing in your eBay listing does
not depict the actual set of boards you have. The picture shows TWO DAC
boards.

Jon
The administrator has disabled public write access.
  • Page:
  • 1
Moderators: PCW, jmelson
Time to create page: 1.800 seconds
Powered by Kunena Forum
© 2013 LinuxCNC.org
Joomla! is Free Software released under the GNU General Public License.