NEWS
LinuxCNC 2.5.2 Release
There are no translations available.

LinuxCNC 2.5.2 Update Released (changelog).
 
LinuxCNC 2.5.1 Release
There are no translations available.

LinuxCNC 2.5.1 Update Released (changelog). If the Package Manager does not prompt you to upgrade see this page.
 
LinuxCNC 2.5.0 Release
There are no translations available.

New major release (changelog). See the instructions to update your system from EMC 2.4 to LinuxCNC 2.5.
 
Home Forum Using LinuxCNC G Code interpreter on EMC

Welcome, Guest
Username: Password: Remember me
Forgot your password? Forgot your username?

TOPIC: interpreter on EMC

interpreter on EMC 20 Okt 2009 18:13 #1006

  • vincent
  • vincent's Avatar
  • OFFLINE
  • Senior Boarder
  • Posts: 48
  • Karma: 0
:laugh: Hey, I found myself lost in the EMC world~recently, I was interested in the interpreter on EMC and the interpolation algorithm. But I was uncertain of the principle about these problems. First, we could write G codes files and run them on EMC, but what we could do is just to curve straight lines and circles, like G1 and G2/G3. Then the interpolator directly interpret the G code, and "make" these commands to be signals, then run the machine. But one thing, if I want to make NURBS, some complex curves or ever toroidals in EMC,is it possible?? I wonder if there is any "commands" to do these, or if I could make it myself?

if anyone here is interested about these, please contact with me
The administrator has disabled public write access.

Re:interpreter on EMC 20 Okt 2009 18:48 #1007

  • cmorley
  • cmorley's Avatar
  • OFFLINE
  • Moderator
  • Posts: 1520
  • Thank you received: 41
  • Karma: 89
I believe the development version of EMC has some NURBS functionality added, But beyond that I don't know.
look here:
wiki.linuxcnc.org/cgi-bin/emcinfo.pl?NURBS
The administrator has disabled public write access.

Re:interpreter on EMC 20 Okt 2009 18:53 #1008

  • vincent
  • vincent's Avatar
  • OFFLINE
  • Senior Boarder
  • Posts: 48
  • Karma: 0
oh, my god!!! you really found that~!! that is it! thanks a billion!!!
The administrator has disabled public write access.

Re:interpreter on EMC 22 Okt 2009 00:46 #1014

  • vincent
  • vincent's Avatar
  • OFFLINE
  • Senior Boarder
  • Posts: 48
  • Karma: 0
cmorley, one thing I wish you could show me is that the is the patch available? Or should I patch my EMC2 at once so that it will support nurbs??
The administrator has disabled public write access.

Re:interpreter on EMC 22 Okt 2009 05:23 #1017

  • BigJohnT
  • BigJohnT's Avatar
  • OFFLINE
  • Administrator
  • Posts: 5080
  • Thank you received: 102
  • Karma: 136
That is on the dev version of EMC2.

wiki.linuxcnc.org/cgi-bin/emcinfo.pl?Installing_EMC2

John
The administrator has disabled public write access.

Re:interpreter on EMC 23 Okt 2009 00:26 #1021

  • vincent
  • vincent's Avatar
  • OFFLINE
  • Senior Boarder
  • Posts: 48
  • Karma: 0
oh, god, but the link does not help。。。。。。
The administrator has disabled public write access.
Time to create page: 1.451 seconds
Powered by Kunena Forum
© 2013 LinuxCNC.org
Joomla! is Free Software released under the GNU General Public License.