how does Linux CNC know how much my machine travel
17 Jul 2014 11:16 #48861
by skvallab
how does Linux CNC know how much my machine travel was created by skvallab
When I give a g code command to move 5 mm for example.
The machine movement is linear and I haven't connected the servo encoder output to my board.
How does it move and stop?.
I have set my servo to run 360' for 5000 pulses.
How do I set it on Linux CNC
Regards
Vallab
The machine movement is linear and I haven't connected the servo encoder output to my board.
How does it move and stop?.
I have set my servo to run 360' for 5000 pulses.
How do I set it on Linux CNC
Regards
Vallab
Please Log in or Create an account to join the conversation.
17 Jul 2014 16:16 #48869
by ArcEye
Replied by ArcEye on topic how does Linux CNC know how much my machine travel
See the answer to your other duplicate post
Please Log in or Create an account to join the conversation.
Time to create page: 0.161 seconds