NEWS
2.6 Live+Install image

Announcing a new Live+Install DVD image for installing LinuxCNC 2.6 on Debian Wheezy. Instructions here.

 
LinuxCNC 2.6.3 is released

Several bugs fixed, see the change log.

 
LinuxCNC 2.6.2 Released

Bug fix see the change log.

 
Home Forum Configuring LinuxCNC GUI's vismach gui not refreshing

Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1

TOPIC: vismach gui not refreshing

vismach gui not refreshing 14 Jan 2012 07:15 #16765

  • dab77
  • dab77's Avatar
  • OFFLINE
  • Gold Boarder
  • Posts: 199
  • Karma: 6
Hi all, i wrote my vismach gui, but it doesn't refresh.
I've net the pins, and checked netting works.
As I start emc2 the window with the picture is drawn, and line points net to hal_pins are drawn at 0, of course.
But then on hal-pins changing drawing doesn't change.

Do you know why? This attachment is hidden for guests. Please log in or register to see it.

Thanks, Davide.
Attachments:
  • Attachment This attachment is hidden for guests. Please log in or register to see it.
The administrator has disabled public write access.

Re:vismach gui not refreshing [SOLVED] 16 Jan 2012 15:11 #16830

  • dab77
  • dab77's Avatar
  • OFFLINE
  • Gold Boarder
  • Posts: 199
  • Karma: 6
I've token a part of code from max5gui.py as an example.
now i've got this working:


Walls and position of object are set by hal_pin

Ciao, Davide.
Last Edit: 16 Jan 2012 15:13 by dab77.
The administrator has disabled public write access.
  • Page:
  • 1
Time to create page: 0.814 seconds
Powered by Kunena Forum
© 2014 LinuxCNC.org
Joomla! is Free Software released under the GNU General Public License.