LinuxCNC Support Forum :: Topic: Errors Applying (1/2)

NEWS

LinuxCNC 2.5.2 Release

LinuxCNC 2.5.2 Update Released (changelog).

LinuxCNC 2.5.1 Release

LinuxCNC 2.5.1 Update Released (changelog). If the Package Manager does not prompt you to upgrade see this page.

LinuxCNC 2.5.0 Release

New major release (changelog). See the instructions to update your system from EMC 2.4 to LinuxCNC 2.5.

Home

Forum

Configuring LinuxCNC

PnCConf Wizard

Errors Applying

Welcome, Guest

Page:
1
2

TOPIC: Errors Applying

Errors Applying 26 Dec 2011 10:56 #15998

SRT
OFFLINE
Expert Boarder
Posts: 141
Thank you received: 1
Karma: 1

I just updated from the 2.5 branch and i am getting errors with PNCconf it will not allow me to apply the changes. Attached are the errors.

NCconf encountered an error. The following information may be useful in troubleshooting:

Traceback (most recent call last):
File "/usr/bin/pncconf", line 8009, in on_complete_finish
self.data.save()
File "/usr/bin/pncconf", line 3303, in save
self.write_halfile(base)
File "/usr/bin/pncconf", line 2545, in write_halfile
if needed:
UnboundLocalError: local variable 'needed' referenced before assignment

The administrator has disabled public write access.

Re:Errors Applying 26 Dec 2011 12:55 #16000

cmorley OFFLINE Moderator Posts: 1518 Thank you received: 41 Karma: 89	Yes I think I see the error. Question - are you asking for an extra lowpass component? If you also add a pyvcp or glade panel does the error go away? Thanks Chris
	The administrator has disabled public write access.

Re:Errors Applying 26 Dec 2011 13:18 #16001

SRT OFFLINE Expert Boarder Posts: 141 Thank you received: 1 Karma: 1	I did add a Pyvcp and the problem presists. I don't know about the lowpass?
	The administrator has disabled public write access.

Re:Errors Applying 26 Dec 2011 13:29 #16002

cmorley OFFLINE Moderator Posts: 1518 Thank you received: 41 Karma: 89	this error should go away if you _do not_ have options: include custom pyvcp gui panel include custom gladeVCP panel and I see that lowpass component is not on the HAL component page so that should not be a problem Is this true? Is this a config you created with a different version of PNCconf?
	The administrator has disabled public write access.

Re:Errors Applying 26 Dec 2011 13:32 #16003

cmorley OFFLINE Moderator Posts: 1518 Thank you received: 41 Karma: 89	ok I have got the error to show. When you picked pyvcp option did you uncheck 'includehal connections'?
	The administrator has disabled public write access.

Re:Errors Applying 26 Dec 2011 13:39 #16004

SRT OFFLINE Expert Boarder Posts: 141 Thank you received: 1 Karma: 1	I might have? I tried so many things. I have used it before and was successful but I am working with resolvers and was trying to get a base layout for a lathe and keep it as clean as possible and add things later. I turned off the PYvcp and it did finish.
	The administrator has disabled public write access.

Re:Errors Applying 26 Dec 2011 13:39 #16005

SRT OFFLINE Expert Boarder Posts: 141 Thank you received: 1 Karma: 1	Beta 1 Version
	The administrator has disabled public write access.

Re:Errors Applying 26 Dec 2011 13:43 #16006

cmorley OFFLINE Moderator Posts: 1518 Thank you received: 41 Karma: 89	K. Thanks for the bug report. i will fix that soon. Did you add an XML file that had resolvers on it? PNCconf can configure resolvers but it needs the XML file. I can make one for you if you have the .BIT file from Peter.
	The administrator has disabled public write access.

Re:Errors Applying 26 Dec 2011 13:43 #16007

SRT OFFLINE Expert Boarder Posts: 141 Thank you received: 1 Karma: 1	I just went back and tried it again. The include halinterface box is checked
	The administrator has disabled public write access.

Re:Errors Applying 26 Dec 2011 13:45 #16008

SRT OFFLINE Expert Boarder Posts: 141 Thank you received: 1 Karma: 1	I have the bit file. rmsvss6_8.bit
	The administrator has disabled public write access.