NEWS
LinuxCNC 2.5.2 Release
LinuxCNC 2.5.2 Update Released (changelog).
 
LinuxCNC 2.5.1 Release

LinuxCNC 2.5.1 Update Released (changelog). If the Package Manager does not prompt you to upgrade see this page.
 
LinuxCNC 2.5.0 Release
New major release (changelog). See the instructions to update your system from EMC 2.4 to LinuxCNC 2.5.
 
Home Forum General International LinuxCNC Users a chinese translation for EMC2 manual

Welcome, Guest
Username: Password: Remember me
Forgot your password? Forgot your username?
  • Page:
  • 1

TOPIC: a chinese translation for EMC2 manual

a chinese translation for EMC2 manual 17 Oct 2011 06:49 #13988

  • dinglei618@hotmail.com
  • dinglei618@hotmail.com's Avatar
Hi guys , i have translated " EMC2_Getting_Started " into chinese .

Now i am translating "EMC2_User_Manual ".

Please visit my blog : blog.sina.com.cn/u/2370524133

Your visit will give me encouragement , thank you .
The administrator has disabled public write access.

Re:a chinese translation for EMC2 manual 17 Oct 2011 07:06 #13990

  • kostas
  • kostas's Avatar
  • OFFLINE
  • Senior Boarder
  • Posts: 76
  • Karma: 3
Nice! I visited you blog already.

Greetings from Greece!
Kostas
The administrator has disabled public write access.

Re:a chinese translation for EMC2 manual 18 Oct 2011 05:34 #14015

  • andypugh
  • andypugh's Avatar
  • NOW ONLINE
  • Moderator
  • Posts: 4091
  • Thank you received: 139
  • Karma: 129
It should be possible to get the translation hosted with the other document translations.
You might also want to check the localisation of the software:
wiki.linuxcnc.org/cgi-bin/emcinfo.pl?Internationalization
The administrator has disabled public write access.

Re:a chinese translation for EMC2 manual 18 Oct 2011 13:00 #14033

  • darty367
  • darty367's Avatar
  • OFFLINE
  • Moderator
  • Posts: 24
  • Karma: 0
Good job B)
The administrator has disabled public write access.

Re:a chinese translation for EMC2 manual 18 Oct 2011 17:31 #14042

  • dinglei618@hotmail.com
  • dinglei618@hotmail.com's Avatar
Andypugh , You are right . But i did not use wiki before.

I'll try anyway.
The administrator has disabled public write access.
  • Page:
  • 1
Time to create page: 1.552 seconds
Powered by Kunena Forum
© 2013 LinuxCNC.org
Joomla! is Free Software released under the GNU General Public License.