NEWS
LinuxCNC 2.5.2 Release
LinuxCNC 2.5.2 Update Released (changelog).
 
LinuxCNC 2.5.1 Release

LinuxCNC 2.5.1 Update Released (changelog). If the Package Manager does not prompt you to upgrade see this page.
 
LinuxCNC 2.5.0 Release
New major release (changelog). See the instructions to update your system from EMC 2.4 to LinuxCNC 2.5.
 
Home Forum Hardware Computer LinuxCNC don't start

Welcome, Guest
Username: Password: Remember me
Forgot your password? Forgot your username?
  • Page:
  • 1

TOPIC: LinuxCNC don't start

LinuxCNC don't start 06 Jul 2012 06:54 #21646

  • Beniamin
  • Beniamin's Avatar
  • OFFLINE
  • Fresh Boarder
  • Posts: 4
  • Karma: 0
I have a problem with the 2.5 version of linux cnc. i've installed from iso and don't start at all.
I've attaches the error repot to thread. My laptop is an acer travelmate 290 if help with something.
Can anyone tell me what to do? This attachment is hidden for guests. Please log in or register to see it.
Attachments:
  • Attachment This attachment is hidden for guests. Please log in or register to see it.
The administrator has disabled public write access.

Re:LinuxCNC don't start 06 Jul 2012 07:07 #21648

  • PCW
  • PCW's Avatar
  • OFFLINE
  • Moderator
  • Posts: 1670
  • Thank you received: 87
  • Karma: 116
"Local APIC disabled by BIOS -- you can enable it with "lapic"
and
"RTAI[hal]: ERROR, LOCAL APIC CONFIGURED BUT NOT AVAILABLE/ENABLED."

are at least part of your troubles

see:

wiki.linuxcnc.org/cgi-bin/wiki.pl?Troubl..._t_run_missing_lapic
The administrator has disabled public write access.

Re:LinuxCNC don't start 06 Jul 2012 09:02 #21652

  • BigJohnT
  • BigJohnT's Avatar
  • OFFLINE
  • Administrator
  • Posts: 4960
  • Thank you received: 87
  • Karma: 134
Beniamin wrote:
I have a problem with the 2.5 version of linux cnc. i've installed from iso and don't start at all.
I've attaches the error repot to thread. My laptop is an acer travelmate 290 if help with something.
Can anyone tell me what to do? This attachment is hidden for guests. Please log in or register to see it.

You should only run the pure simulator on your laptop! Due to hardware power saving on laptops it is not recommended that you try and run a machine from a laptop. But if your brave and determined I've heard tell of at least one person that was able to run a machine on a laptop with the real time kernel after sinking a ton of time at the task.

wiki.linuxcnc.org/cgi-bin/wiki.pl?LinuxCNC_Pure_Simulator

John
The administrator has disabled public write access.
  • Page:
  • 1
Moderators: ArcEye
Time to create page: 0.855 seconds
Powered by Kunena Forum
© 2013 LinuxCNC.org
Joomla! is Free Software released under the GNU General Public License.