This documentation is no longer maintained. For documentation of the current version of emc2, please see http://www.linuxcnc.org/docview/html

CHARGE_PUMP

NAME
SYNOPSIS
FUNCTIONS
PINS
LICENSE

NAME

charge_pump − Create a square-wave for the ’charge pump’ input of some controller boards

SYNOPSIS

loadrt charge_pump

FUNCTIONS

charge-pump

Toggle the output bit (if enabled)

PINS

charge-pump.out bit out

Square wave if ’enable’ is TRUE or unconnected, low if ’enable’ is FALSE

charge-pump.enable bit in (default: TRUE)

If FALSE, forces ’out’ to be low

LICENSE

GPL