|
invert − Compute the inverse of the input signal |
|
The output will be the mathematical inverse of the input, ie out = 1/in. The parameter deadband can be used to control how close to 0 the denominator can be before the output is clamped to 0. deadband must be at least 1e-8, and must be positive. |
|
invert.N (uses floating-point) |
|
invert.N.in float in |
|
Analog input value |
|
invert.N.out float out |
|
Analog output value |
|
invert.N.deadband float rw |
|
The out will be zero if in is between -deadband and +deadband |
|
GPL |