This documentation is no longer maintained. For documentation of the current version of emc2, please see http://www.linuxcnc.org/docview/html

ESTOP_LATCH

NAME
SYNOPSIS
FUNCTIONS
PINS

NAME

estop_latch − ESTOP latch which sets ok-out true and fault-out false only if ok-in is true, fault-in is false, and a rising edge is seen on reset. While ok-out is true, watchdog toggles, and can be used for chargepumps or similar needs.

SYNOPSIS

loadrt estop_latch [count=N]

FUNCTIONS

estop-latch.N

PINS

estop-latch.N.ok-in bit in

estop-latch.N.fault-in bit in

estop-latch.N.reset bit in

estop-latch.N.ok-out bit out

estop-latch.N.fault-out bit out

estop-latch.N.watchdog bit out