Format: 1.8 Date: Tue, 18 Jul 2017 21:02:57 -0600 Source: linuxcnc Binary: linuxcnc-uspace-dev linuxcnc-uspace linuxcnc-doc-en linuxcnc-doc-fr linuxcnc-doc-es Architecture: source i386 all Version: 1:2.7.10 Distribution: unstable Urgency: medium Maintainer: Sebastian Kuzminsky Changed-By: Sebastian Kuzminsky Description: linuxcnc-doc-en - PC based motion controller for real-time Linux linuxcnc-doc-es - PC based motion controller for real-time Linux linuxcnc-doc-fr - PC based motion controller for real-time Linux linuxcnc-uspace - PC based motion controller for real-time Linux linuxcnc-uspace-dev - PC based motion controller for real-time Linux Changes: linuxcnc (1:2.7.10) unstable; urgency=medium . * docs: document [EMCMOT]COMM_TIMEOUT * docs: teach buildsystem to generate manpages from asciidoc source * docs: add info about the Touchy radio buttons * docs: improve some hm2_bspi manpages . * gmoccapy: added Num_Pad jogging * image-to-gcode: work around gratuitous breakage in PIL . * GladeVCP: don't exit if CombiDRO fails to poll status . * hy_vfd: add --motor-poles, to set PD143 * hy_vfd: add --base-frequency to set PD004 on the VFD * hy_vfd: document PD004/base-freq better in the manpage * hy_vfd: fix some typos in --help output and comments . * add a driver for the Huanyang GT series VFD . * hm2_eth: add support for Mesa 7i93 AnyIO ethernet board * hm2_sserial: Fix a bug where the second port would not work if the first was disabled . * gcodemodule: make interp really close part program * pluto: use rtapi's fabs() instead of the kernel's abs() * steptest: don't change position-cmd when not running . * uspace: find top online CPU . * tests: make timeouts simpler & smarter in halui/jogging test . * build: fix building linuxcnc.1 when docs not requested * build: don't fail when requested not to build documentation * build: ensure asciidoc manpages are built before checklink is run * build: build-depend on asciidoc-dblatex on debian stretch * build: on Debian Stretch and newer, depend on gstreamer 1.0 * build: add debian/configure stanza for debian stretch * build: rename the GS2 VFD Makefile variables for clarity Checksums-Sha1: 090b0ab96cb7cea667599670534a0669fadd27d4 1467 linuxcnc_2.7.10.dsc 926b5e525d14b19f33d85ff36783f3638f6199fb 20577348 linuxcnc_2.7.10.tar.xz 0b4898df40e2eb9c7041891a5fa3f1078d98220e 624578 linuxcnc-uspace-dev_2.7.10_i386.deb 2d47b6b2117cda211c284e0e1c07c768b384f38f 3699444 linuxcnc-uspace_2.7.10_i386.deb d211b2f988754f415f15de85018f99bfce5e37b3 12299866 linuxcnc-doc-en_2.7.10_all.deb fbfde945e2df46c94f0b215aef5d0e69d346f95b 6444942 linuxcnc-doc-fr_2.7.10_all.deb fbdaf701a6bcf24d8bcae75ba2f90ed919bfd867 11492452 linuxcnc-doc-es_2.7.10_all.deb Checksums-Sha256: a06e2233e1a5952c36749e75b5515d14ec183779a80fe96ce731812e2cf4aa53 1467 linuxcnc_2.7.10.dsc 29775de2bfabd02f04b99f3214e54358e6ff6df33474531480aa49ea0b8c367b 20577348 linuxcnc_2.7.10.tar.xz a3dbd57a87e3ac19023be8a99e8d0c014fb881920def610cc5efd09de68a2733 624578 linuxcnc-uspace-dev_2.7.10_i386.deb 1d034c73ffcd67694845821decfe05aecbcb2af68d44d6259f1a74848c942610 3699444 linuxcnc-uspace_2.7.10_i386.deb bcd758de5673dafbf6e45ccaa160cb873cac0ea19cb314f990714003105d0c4e 12299866 linuxcnc-doc-en_2.7.10_all.deb 8c9d452b624a78d286e462ec722e860f4a3d283adccab49dcd60bf9c2f7f6936 6444942 linuxcnc-doc-fr_2.7.10_all.deb 5454382b114a44bb3daf6dd771ea734df42e2887779e664e3dddb3683302e2e4 11492452 linuxcnc-doc-es_2.7.10_all.deb Files: 90f020fcc65f9838279f3bac3cca5b76 1467 misc extra linuxcnc_2.7.10.dsc 28d39df45c8bce18a9e9e4d2522dfa56 20577348 misc extra linuxcnc_2.7.10.tar.xz f7d5f0d1c9372456a88b0f68e2affb84 624578 libs extra linuxcnc-uspace-dev_2.7.10_i386.deb 97caef2e68c50543b97221051a158138 3699444 misc extra linuxcnc-uspace_2.7.10_i386.deb e75c25e8243f674fc5b850c08878c226 12299866 misc extra linuxcnc-doc-en_2.7.10_all.deb 32090342121ad7e0964b13574a9e4359 6444942 misc extra linuxcnc-doc-fr_2.7.10_all.deb fa84e452482efc0ded496715f8c63665 11492452 misc extra linuxcnc-doc-es_2.7.10_all.deb