NEWS
emc2_2.4.1 Release
A fresh bugfix release (Changelog). You can get it: as a source package from sourceforge , from Git , or as a precompiled package which works on Ubuntu as described here .
 
Ubuntu 8.04&EMC2 Live CD
The EMC2 team has a custom Live-CD (EU mirror) based on Ubuntu 8.04 with emc 2.3.x included, that will let you try out EMC2 before installing, and it's also the easiest way to install Ubuntu and EMC2 together. (more)
 
emc2_2.4.0 Release

A new major release. You can get it: as a source package from sourceforge, from Git , or as a precompiled package which works on Ubuntu as described here. (more)
 
Site Search
Google
Web LinuxCNC
Login
Home arrow Forum

EMC Support Forum
Welcome, Guest
Please Login or Register.    Lost Password?
Active topics in last 720 hours (Total: 75) The newest posts for the active topics are shown
4 Hours | 8 Hours | 12 Hours | 24 Hours | 48 Hours | Week | Since last visit
Topic/Forum New posts Latest post author Posted at
Acceleration divided by two Show most recent message
Forum : Advanced Configuration		2BigJohnT2010/07/29 15:37
GUI's Show most recent message
Forum : General EMC Questions		4BigJohnT2010/07/29 15:35
Configuring a stepper as spindle motor Show most recent message
Forum : StepConf Wizard		1Tim.G2010/07/29 09:28
5i20 configure for step/dir + encoder Show most recent message
Forum : HAL Components		6andypugh2010/07/29 03:12
EMC2.3.5 Crashed Show most recent message
Forum : AXIS		1erlyrisa2010/07/28 22:52
EMC 2.4 Ubuntu 10.04 Show most recent message
Forum : Forum announcements		1BigJohnT2010/07/28 14:58
EMC2 and UART Show most recent message
Forum : General EMC Questions		5grawp2010/07/28 13:24
Realtime Kernal Required [Page: 1,2] Show most recent message
Forum : Installing EMC		3Gonefishing2010/07/28 11:46
PCI Parallel card compatibility Show most recent message
Forum : Computer		1edgecombe_r2010/07/28 01:52
Internatialisation bug Show most recent message
Forum : PnCConf		3cmorley2010/07/28 01:18
Light Machines Company Mill Show most recent message
Forum : StepConf Wizard		2cmorley2010/07/27 23:12
Mill table keeps moving after I release the arrow Show most recent message
Forum : General EMC Questions		4jmelson2010/07/27 20:38
New GUI for Emc available for testing... [Page: 1...4,5,6] Show most recent message
Forum : General EMC Questions		8cmorley2010/07/26 22:59
Where is limit's pins? Show most recent message
Forum : HAL Components		2andypugh2010/07/26 12:19
EMC2 Error massage Show most recent message
Forum : Using this Forum Questions		5Zig2010/07/25 23:05
Config HAL with encoder and step/dir Show most recent message
Forum : HAL Components		3PCW2010/07/25 08:58
Motor Shaft Coupler Sources Show most recent message
Forum : CNC Machines		1TarHeelTom2010/07/25 07:33
What Linux CAD and CAM software do YOU use? Show most recent message
Forum : General EMC Questions		2andypugh2010/07/24 14:54
Boring Subroutine Show most recent message
Forum : Subroutines		1BigJohnT2010/07/24 14:48
What is Pncconf all about? Show most recent message
Forum : PnCConf		1cmorley2010/07/24 12:54
How do I run pncconf? [Page: 1,2] Show most recent message
Forum : PnCConf		7cmorley2010/07/24 12:22
Filters [Page: 1...2,3,4] Show most recent message
Forum : General EMC Questions		1bkubicek2010/07/23 04:45
Grecode Show most recent message
Forum : G Code		1bkubicek2010/07/23 04:42
[SOLVED] MPG help [Page: 1...2,3,4] Show most recent message
Forum : Advanced Configuration		19cmorley2010/07/22 16:43
How do you assign HOME and MAXLIM to one pin? Show most recent message
Forum : CNC Machines		3BigJohnT2010/07/22 16:35
Can I have an output for "MACHINE ON" condition Show most recent message
Forum : General EMC Questions		3jimmyservo2010/07/22 10:09
Can EMC home on all three axis simultaneously Show most recent message
Forum : General EMC Questions		4ichudov2010/07/22 07:08
Servo motors "buzzing" when not in motion Show most recent message
Forum : General EMC Questions		3ichudov2010/07/22 07:03
How to modify EMC2 follow my way? Show most recent message
Forum : Installing EMC		6namnp20072010/07/21 23:27
Calibration dialog incomplete and error message Show most recent message
Forum : Advanced Configuration		2BigJohnT2010/07/21 06:37
Semi-Manual Lathe Configuration Show most recent message
Forum : Advanced Configuration		2BigJohnT2010/07/21 04:46
Calibration MAX_VELOCITY fixed to 10. BUG? Show most recent message
Forum : Advanced Configuration		2BigJohnT2010/07/21 04:45
Tooltable is only loading 4 digits from file. BUG? Show most recent message
Forum : Advanced Configuration		3BigJohnT2010/07/21 04:44
Homing Show most recent message
Forum : StepConf Wizard		5andypugh2010/07/21 04:43
PhidgetStepper Unipolar 4-Motor Show most recent message
Forum : General EMC Questions		3PrinzFritz2010/07/21 03:49
Backlash Compensation [Page: 1,2] Show most recent message
Forum : Advanced Configuration		3cmorley2010/07/20 21:24
Any Linux based macro system for G code generation Show most recent message
Forum : General EMC Questions		4ichudov2010/07/19 18:53
Spindle Speed to Serial Port Show most recent message
Forum : Advanced Configuration		5andypugh2010/07/19 11:40
help with kinematics - standard XY movement but .. [Page: 1,2] Show most recent message
Forum : Advanced Configuration		10step4linux2010/07/19 10:12
I have my mill working in 2D (for now) THANKS!!! Show most recent message
Forum : General EMC Questions		1ichudov2010/07/19 05:28
Subroutine GUI Show most recent message
Forum : Subroutines		3Rick G2010/07/19 03:26
Help Request - EStop has a waveform on my mill... Show most recent message
Forum : CNC Machines		6shaworth2010/07/18 14:50
Barcode Label Printer Show most recent message
Forum : EMC Users		1gangsta2010/07/18 04:51
Pololu A4983 driver and EMC, no movement, noise [Page: 1,2] Show most recent message
Forum : StepConf Wizard		9PCW2010/07/17 13:58
HAL hand holding please [Page: 1,2] Show most recent message
Forum : HAL Components		9andypugh2010/07/17 03:16
Mesa 5i23 works with 2.3 but not with 2.4 [Page: 1,2] Show most recent message
Forum : Driver Boards		2PCW2010/07/16 17:38
Encoder.9 [Page: 1,2] Show most recent message
Forum : HAL Components		5Zig2010/07/16 17:35
Chage G-codes to words Show most recent message
Forum : General EMC Questions		4BigJohnT2010/07/16 10:19
comp_file example Show most recent message
Forum : Advanced Configuration		5aike2010/07/15 19:50
Technical MOtion Show most recent message
Forum : Driver Boards		1Janosch2010/07/14 10:53
OpenCAMLib [Page: 1,2] Show most recent message
Forum : CAM		5awallin2010/07/14 02:44
Hooking up with HAL Show most recent message
Forum : HAL Components		1BigJohnT2010/07/13 17:22
Homing with prox and index no longer working Show most recent message
Forum : HAL Components		3jimmyservo2010/07/13 16:07
Can I have a ONE AXIS cnc machine config? Show most recent message
Forum : General EMC Questions		2robh2010/07/13 15:06
Servo config, Mesa, H bridges, current sensing? Show most recent message
Forum : Driver Boards		3mdagenais2010/07/12 12:49
Acceleration capability for Fanuc Model 0 motor Show most recent message
Forum : CNC Machines		4PCW2010/07/12 08:01
Lathe build. Show most recent message
Forum : Driver Boards		3PCW2010/07/12 07:54
Help m67 ! Show most recent message
Forum : General EMC Questions		1Deotti2010/07/11 15:28
Mesa 7i43. Error loading configuration. [Page: 1,2] Show most recent message
Forum : Driver Boards		7cmorley2010/07/10 22:38
ARM and EMC [Page: 1,2] Show most recent message
Forum : Computer		2BigJohnT2010/07/10 05:32
solenoid valve [Page: 1,2] Show most recent message
Forum : Advanced Configuration		5BigJohnT2010/07/10 04:20
Mesa 5i20 daughter cards [Page: 1...2,3,4] Show most recent message
Forum : Driver Boards		3Rick G2010/07/10 04:12
Mesa 5i20 servo configuration [Page: 1...9,10,11] Show most recent message
Forum : Driver Boards		19Zig2010/07/10 00:48
Modbus TCP/IP..... is it working ? [Page: 1,2,3] Show most recent message
Forum : ClassicLadder		1robertofonte2010/07/08 09:11
Cutting threads on a lathe Show most recent message
Forum : Advanced Configuration		3martin2010/07/08 08:44
Post processor for MasterCAM Show most recent message
Forum : G Code		3Mike_Eitel2010/07/07 06:48
M1XX code calling small program Show most recent message
Forum : G Code		3Rick G2010/07/05 04:23
touch-off with three reference points Show most recent message
Forum : AXIS		2Rick G2010/07/03 11:50
my blog on open source CAM Show most recent message
Forum : CAM		2BigJohnT2010/07/03 05:04
boot error - Live CD [Page: 1,2] Show most recent message
Forum : Installing EMC		1AssassinXCV2010/07/02 19:50
Burny 2.8 to EMC conversion Show most recent message
Forum : General EMC Questions		5DonnieET2010/07/02 10:42
A "hello" and a Live-CD question Show most recent message
Forum : Installing EMC		4DavidB2010/07/01 16:03
Master and Slave axes in EMC2+Montec Show most recent message
Forum : Advanced Configuration		1Andrey_L2010/07/01 05:43
Configuring scale feedback Show most recent message
Forum : Advanced Configuration		1EFIUnlimited2010/07/01 01:00
hardinge with siemmens drives Show most recent message
Forum : CNC Machines		1rasta2010/06/30 02:36
Powered by Kunenaget the latest posts directly to your desktop
 
© 2010 LinuxCNC.org
Joomla! is Free Software released under the GNU/GPL License.